GPS 430-II GPS Synchronization Module Instruction Sheet Introduction The GPS 430-II GPS Synchronization Module guarantees that the time clock uncertainty of the Fluke 430-Series II Power Quality Analyzers does not exceed 20 ms for 50 Hz signals according to IEC 61000-4-30. This performance is necessary to ensure that Class A instruments produce the same 10 aggregation results when connected to the same signal. The GPS 430-II can only be used on the Fluke 430-Series II Power Quality Analyzers. Note The GPS system is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. Contacting Fluke To contact Fluke, call one of the following telephone numbers: Technical Support USA: 1-800-44-FLUKE (1-800-443-5853) Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853) Canada: 1-800-36-FLUKE (1-800-363-5853) Europe: +31 402-675-200 Japan: +81-3-6714-3114 Singapore: +65-6799-5566 Anywhere in the world: +1-425-446-5500 Or, visit Fluke s website at www.fluke.com. To register your product, visit 3210-PR-TF English Instruction Sheet Page 2 Symbols The table below lists the symbols used on the Product and in this instruction sheet. Symbol Description Risk of Danger. Important information. See Instruction Sheet. Conforms to European Union directives. This product complies with the WEEE Directive marking requirements. The affixed label indicates that you must not discard this electrical/electronic product in domestic household waste. Product Category: With reference to the equipment types in the WEEE Directive Annex I, this product is classed as category 9 Monitoring and Control Instrumentatio product. Do not dispose of this product as unsorted municipal waste. Before You Start Warning To prevent possible electric shock, fire, or personal injury, do not permit the cables or GPS antenna to come in contact with hazardous electrical conductors. This Product is not intended to be installed in electrical cabinets or other locations where hazardous conductors are exposed. Your shipment includes: 1x GPS 430-II unit with 2 cables (Figure 1): - Cable with mini USB connector - Cable connected to the GPS module 1x Universal Mains-Power Adapter BC430/820 (Figure 2) 1x Instruction Sheet GPS 430-II (this sheet) 1x Instruction Sheet BC430/820