Datasheet: Quick Clean Cleaner Solution Datasheet: Quick Clean Cleaner Solution The Fluke Networks Quick Clean Cleaners are a family of mechanical cleaning tools Research has shown over 85% of designed to clean fiber optic connector end faces on patch cables, within adapters or fiber related problems in data patch panels. These Quick Clean Cleaners are molded with an antistatic material centers, campus, and other enterprise or telecom environments and use a novel dry cleaning strand that gently sweeps and removes harmful are caused by contaminated contaminants from the connector without damaging the connector end face. These connectors or end-faces. tools are particularly effective at removing contaminants during fiber optic installation that include: With Fluke Networks Quick Clean Cleaners, harmful contaminants are Road Dust (ISO 12103-1) easily removed from a wide variety Skin Oil Residue of connector types. Even with no training, field technicians and fiber Salt Water Residue installers can use a simple insertion Alcohol Residue and push motion to remove residue, Vegetable Residue debris and dust that can negatively Graphite Dryer Lint impact network performance. These cleaners are great complements to Hand Lotion the existing Fluke Networks fiber Distilled Water Residue optic solvent pen, cleaning cube and cleaning kits for all fiber Quick Clean 1.25 mm Cleaner environments. and 2.5 mm Cleaner The Quick Cleaner family is The Quick Clean 1.25 mm Cleaner is designed to specifically designed to provide a clean LC, LC secure keyed and MU connectors cost effective solution for most while the Quick Clean 2.5 mm Cleaner is used to bulkhead connectors and end-faces, clean SC, ST, FC and E2000 connectors with including MPO/MTP connectors. either UPC or APC polished ferrules. Unlike traditional swab cleaners that rely on the technique of the user, the Quick Clean Cleaners provide consistent cleaning every time. The user can easily engage the cleaner using a simple push motion and the user will hear a click sound when the process is completed. Quick Clean Cleaner Tools - 2.5 mm, 1.25 mm and MPO Features: Simple pushing motion to engage tool Audible CLICK to alert the user when tool is fully engaged Clean over 525 end faces per unit Tip extender to 208 mm for hard to reach connectors Crush resistant to over 250N Impact resistant to survive drops over 1.5m Most convenient cleaning solution for 85% of fiber optic network performance issues 1 of 4Quick Clean MPO Cleaner The MPO Cleaner is designed for cleaning the fiber arrays on MPO/MTP based connectors. This tool is capable of cleaning MT based connector systems loaded in a bulkhead adapter and on unmated cable assemblies. The Quick Clean MPO Cleaners will clean both female (no guide pin) and male (with steel guide pin) patch panel. The tool will also clean both flat polished multimode and 8 angled singlemode MT ferrules. Features: Simple dial turn engagement that is easy to operate Audible CLICK to alert the operator when cleaning is completed Clean over 600 end faces per unit Cleans male and female MT ferrule Nozzle is keyed for precise alignment of the cleaning tip to the fiber array Alignment cap lid opens for cleaning the unmated connectors Quick Clean Cleaners Ordering Information QuickClean-1.25-5P QuickClean-1.25-1P QuickClean-2.5-5P QuickClean-2.5-1P Quick Clean Cleaner 1.25 mm Quick Clean Cleaner 1.25 mm Quick Clean Cleaner 2.5 mm Quick Clean Cleaner 2.5 mm Fiber, LC and MU, 5 pack Fiber, LC and MU, Single Fiber - SC, ST, FC, E2000, 5 Fiber - SC, ST, FC, E2000, pack Single 2 of 4