Technical data P5500 Series Hydraulic and pneumatic comparison test pumps, media separators and accessories Hydraulic comparison test pumps Fluke Calibration hydraulic test pumps are used for checking pressure measuring instruments against master test gauges, indicators or transducers. These cost effective instruments, which include several features from our popular line of hydraulic deadweight testers, are capable of easily generating high pressures and provide precise control for important calibration requirements. Model P5515 Model P5514B Built-in pump Bench mount design for large Vernier control volume appli- for fine pressure cations and adjustments system priming Tool-free test High quality connectors screw press for Compatible with a fine pressure wide range of fluids control including sebacate, Acrylic reservoir mineral oil, and for visibility of fluid level and quality distilled water Test port adapters which require no PTFE tape or wrenches The standard O-ring seals are Viton. Ethylene Propylene seals are available for use with phosphate-ester-based fluids. Built-in drain plug for removal of old fluid Sturdy carrying case with lid Model O-ring Model O-ring Compatible with a wide range of fluids including P5515-140M Viton P5514B-70M Viton sebacate, mineral oil, and distilled water. Ethylene Ethylene P5515-140M-EP P5514B-70M-EP Propylene Propylene Hydraulic comparison test pumps Model P5515 Model P5514B Pressure range 0 psi to 20,000 psi (140 MPa) 0 psi to 10,000 psi (70 MPa) M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT 1/4 NPT Female (quantity 2), 1/2 NPT Female, Test port adapters and BSP (plus 1 additional 1/4 NPT adapter) 1/4 BSP Female, 1/2 BSP Female Weight 16 kg (36 lb) 5 kg (11 lb) 440 mm x 300 mm x 215 mm 279.4 mm x 279.4 mm x 254 mm Dimensions (W x D x H) (17.5 in x 12 in x 8.5 in) (11 in x 11 in x 10 in) Reservoir volume 150 cm3 (9.2 in3) 75 cm3 (4.6 in3) Screw press displacement 5.5 cm3 (0.34 in3) 20 cm3 (1.2 in3) Priming Pump displacement 4.7 cm3 (0.293 in) per strokePneumatic comparison test pumps These pneumatic comparison test pumps are designed for testing pressure measuring instruments against master test instruments. These cost effective instruments provide precise control for important calibration requirements and include many features found in our popular line of pneumatic deadweight testers. Model P5510 Model P5513 Dual pressure/ High pressure vacuum capability pneumatic operation Bench mount design Screw press for Built-in hand pump fine pressure as pressure/vacuum adjustments source High quality High quality needle needle valves valve for fine control for fine control Test port adapters Test port adapters which require no PTFE tape which require no or wrenches PTFE tape or wrenches Sturdy carrying case with lid Note: P5513 requires a pressure source, such as a nitrogen bottle, for operation. Pneumatic comparison test pumps Model P5510-2M Model P5513-20M Pressure range 0 psi to 300 psi (2 MPa) 0 psi to 3,000 psi (21 MPa) Vacuum range 0 in to 27 in Hg (915 mbar 90% vacuum) M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT Test port adapters and BSP (plus 1 additional 1/4 NPT adapter) and BSP (plus 1 additional 1/4 NPT adapter) Weight 3.5 kg (7.5 lb) 8 kg (17 lb) 240 mm x 330 mm x 180 mm 440 mm x 300 mm x 215 mm Dimensions (W x D x H) (9.5 in x 13 in x 7 in) (17.5 in x 12 in x 8.5 in) Gas supply connection 1/4 NPT female 2700G Reference Pressure Gauge Provides best- in-class 0.02% FS accuracy Available in ranges up to 10,000 psi (70 MPa) Can be used with P5500 Series Com- parison Test Pumps for a complete pressure calibration solution Note: Detailed product information about the 2700G, including a product data sheet, is available on the Fluke Calibration website at www.flukecal.com/2700G. 2 Fluke Calibration P5500 Series hydraulic and pneumatic comparison test pumps, media separators and accessories