AFBR-2CARxxZ
10G Ethernet SFP+ Active Optical Cable (AOC)
Product Brief
Description Features
Proven High Reliability 850 nm technology: Avago
The Avago Technologies AFBR-2CARxxZ Active Optical
VCSEL transmitter and Avago PIN receiver
Cable (AOC) is part of a family of SFP+ products to serve
Maximum power dissipation 350 mW per Active
10Gb Ethernet (10GbE) applications. The letters xx of
Cable end
the part number AFBR-2CARxxZ denote the cable length
in meters. The AFBR-2CARxxZ AOC enables 10GbE
Avago SFP+ package design enables equipment EMI
equipment designs with very high port density based
performance in high port density applications with
on the electrical and mechanical specification enhance -
margin to Class B limits
ments to the well known SFP specifications developed
Specifications
by the SFF Committee. The specifications are referred to
as SFP+ to represent the enhancements over previous
Electrical specifications per SFF-8431 Specifications
SFP specifications. The SFP+ AOC have a cable length up
for Enhanced Small Form Factor Pluggable Module
to 20m. These AOCs can be used as an alternative so-
SFP+
lution to SFP+ passive and active copper cables, while
0 to 70 C case temperature operating range
providing improved signal integrity, longer distances,
Rx_LOS and Tx_DISABLE supported
superior electromagnetic immunity and better bit error
rate performance. Mechanical specifications per SFF Committee SFF
8432 Improved Pluggable Formfactor IPF
Part Numbers
Compliant to Restriction on Hazardous Substances
(RoHS) per EU and China requirements
AFBR-2CAR01Z 1 meter SFP+ Active Optical Cable
Class 1 eye safe per requirement of EN 60825-1 2007,
AFBR-2CAR02Z 2 meter SFP+ Active Optical Cable
EN 60825-2 A2 2010
AFBR-2CAR03Z 3 meter SFP+ Active Optical Cable
1E-15 BER performance
AFBR-2CAR05Z 5 meter SFP+ Active Optical Cable
AFBR-2CAR07Z 7 meter SFP+ Active Optical Cable Applications
AFBR-2CAR10Z 10 meter SFP+ Active Optical Cable
1/10 Gigabit Ethernet (1/10GbE)
AFBR-2CAR15Z 15 meter SFP+ Active Optical Cable
1/2/4/8G Fibre Channel (1/2/4/8GFC), Fibre Channel
AFBR-2CAR20Z 20 meter SFP+ Active Optical Cable
InfiniBand (QDR/DDR/SDR)
AFCT-5016Z SFP+ Evaluation Board
Data Center Networking
- Converged Enhanced Ethernet Data Centers
- Data Center Bridging
Networked storage systems
High Performance Computing
Proprietary Interconnects
Patent - www.avagotech.com/patents 15.2
Uncompressed LABEL COLOR TAG
Top - 1
20.1
51
8.60.1
Right - 1
Front - 1
2.550.1 1.40.1
65
30
Bottom - 1
Key Parameters
Parameter Value Units Notes
Data rate per lane From 1 to 10.3125 Gbps No retimer or CDR devices embedded in the module.
Allows operation at datarates below 10.3125 Gbps
Protocols 1 GbE, 10GbE Ethernet, Fibre Channel, InfiniBand, Other Protocols
1/2/4/8/10 GFC and Proprietary Datarates as well
SDR/DDR QDR
Power Supply Voltage 3.3 V 5%
Temperature Range 0 - 70 C
Wavelength 850 nm
Bit Error Rate Performance 1E-15
Management Interface Two-Wire Serial Memory Map access Page A0h only per SFF-8472
Revision 11.0
Laser Output Power Class 1 EN 60825-1 2007, EN 60825-2 A2 2010
Power consumption per end 275 mW Nominal Power
Mechanical Specification Mechanical specifications per SFF Committee
SFF-8432 Improved Pluggable Formfactor IPF
Can be installed in any INF-8074 or SFF-8431/2
compliant Small Form Pluggable (SFP) port
Electrical Interface 20 pins SFF Committee SFF 8431 Specifications for Enhanced 8.5
and 10 Gigabit Small Form Factor Pluggable Module SFP+
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright 2005-2014 Avago Technologies. All rights reserved.
AV02-4473EN - March 21, 2014
PRELIMINARY DATA