AFBR-79EIPZ QSFP+ iSR4 Pluggable, Parallel Fiber-Optics Module for 40 Gb Ethernet, 4 x 10 Gb Ethernet and InfiniBand Applications Product Brief Description Features The Avago Technologies AFBR-79EIPZ is a Four-Channel, Compliant to 40GbE specifications per IEEE 802.3ba- Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver with an 2010 (40GBASE-SR4 and XLPPI) integrated push-pull tab for 40 Gigabit Ethernet (40GbE) Support optical interoperability with IEEE 802.3ae applications with added capability of inter-operating with 10GBASE-SR compliant modules of various form factors IEEE 10GBASE-SR compliant products. It also supports 4 x such as SFP+, XFP and X2 10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) ap - Support 40G-IB-QDR / 20G-IB-DDR / 10G-IB-SDR plication and is backward compatible to the 4 x 5G IB dual applications data rate (20G-IB-DDR) and 4 x 2.5G IB single data rate (10G-IB-SDR) applications. This transceiver is a high per- Compliant to industry-standard QSFP+ SFF-8436 formance module for short-range multi-lane data com- Specification munication and interconnect applications. It integrates Power Level 1: Max Power < 1.5W four data lanes in each direction with each lane operating High port density: 21mm horizontal port pitch at 10.3125 Gbps, giving an aggregated bandwidth of 40 Gbps. This transceiver can also be used for high density Push-pull tab: ease of transceiver insertion and 10 Gigabit Ethernet application. It allows optical interop- extraction tab front clip color codedGree for iSR4 erability with any 10 Gigabit Ethernet transceiver, compli- identification ant to the IEEE 802.3ae 10GBASE-SR specifications, of form Operates at 10.3125 Gbps per channel with 64b/66b factors such as SFP+, XFP and X2, to provide an effective encoded data for 40GbE / 10GbE applications and at port count of over 100 within 1 RU rack. The push-pull tab 10 Gbps with 8b/10b compatible encoded data for facilitates the insertion and extraction of these transceiv- 40G-IB-QDR application ers in such high density environment. This transceiver is Links up to 100 m using OM3 fiber and 150m using designated as a QSFP+ iSR4 solution, where the letter OM4 fiber represents interoperability between this QSFP+ transceiv- er with any IEEE 10GBASE-SR compliant modules. 0 to 70C case temperature operating range Proven High Reliability 850 nm technology: Avago This QSFP+ transceiver link length for either 40 Gigabit Technologies VCSEL array transmitter and Avago Ethernet or high density 10 Gigabit Ethernet application Technologies PIN array receiver is up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules are designed to operate over multimode Hot pluggable transceiver for servicing and ease of fiber systems using a nominal wavelength of 850nm. The installation electrical interface uses a 38 contact edge type connec- Two-Wire Serial (TWS) interface with Digital Monitoring tor. The optical interface uses an 8 or 12 fiber MTP (MPO) and maskable interrupts for expanded functionality connector. This module incorporates Avago Technologies Utilizes a standard 12/8 lane optical fiber with MTP proven integrated circuit and VCSEL technology to pro- (MPO) optical connector for high density and thin, vide reliable long life, high performance, and consistent light-weight cable management service. Applications Part Number Ordering Information 40GbE, high density 4 x 10GbE, and 40G-IB-QDR / AFBR-79EIPZ QSFP+ iSR4 with DMI and push-pull tab 20G-IB-DDR / 10G-IB-SDR interconnects Datacom/Telecom switch & router connections Data Aggregation and Backplane Applications Proprietary Protocol and Density ApplicationsOptical Interface 1x4 VCSEL Array 1x4 PIN Array Electrical Interface Evaluation Kit Transceiver Block Diagram Laser TX Input Driver 4 Bu er 4 Din 4:1 p/n (8) Channels Channels SCL SDA ModSelL Control LPMode Monitors ModPresL ResetL IntL RX Input TIA 4 Bu er 4 Dout 4:1 p/n (8) Channels Channels Mechanical Dimensions: 4.20 Clip color coded Flat surface 18.35 Gree for iSR4 17.30 3.00 131.8 98.0 B 53 8.50 8.20 B 12.9 All dimensions in millimeters Key Product Parameters Parameter Value Units Notes Data rate per lane 10.3125 Gbps Per IEEE 802.3ba 40GBASE-SR4 standard 1 Link Length 100 m OM3 150 m OM4 Transceiver Case Operating Temperature 0-70 C Power Supply Voltage 3.3 V Average Output Power, Max , each lane -1 dBm Per IEEE 802.3ae 10GBASE-SR standard Management Interface Two-Wire Serial Per SFF-8436 QSFP+ specification Digital Monitoring Per SFF-8436 QSFP+ specification Transceiver Eye Safety Class 1 Per EN 60825-1:2007 Transceiver Power Consumption, Max 1.5W Power Level Class 1 Electrical Connector 38 contact connector Per SFF-8436 QSFP+ specification Electrical interface XLPPI High Speed Electrical Per IEEE 802.3ba standard Notes: 1. Connector loss of 1.5dB (OM3) / 1dB (OM4) allocated For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2013 Avago Technologies. All rights reserved. AV02-3496EN - May 10, 2013 2.30 1.00