AFBR-814FN1Z Foxconn

MiniPOD AFBR-814VxyZ, AFBR-824VxyZ 14 Gbps/Channel Twelve Channel, Parallel Fiber Optics Modules Product Brief Features Description Compatible with 12FDR InfiniBand The AFBR-814VxyZ Twelve Channel, Pluggable, Parallel Fiber Optics Transmitter and AFBR-824VxyZ Twelve Compliant to IEEE 802.3ba 100GbE (100GBASE-SR10 Channel, Pluggable, Parallel Fiber Optics Receiver are high and nPPI) per lane performance fiber optics modules for short-range parallel Operates at 10 Gbps with 8b/10b encoded data, for IB- multi-lane data communication and interconnect applica- QDR application, 10.3125 Gbps for 100GbE, and up to tions. The high density optical modules are designed to 14.0625 Gbps for IB-FDR with 64b/66b encoded data operate over multimode fiber systems using a nominal High Aggregate bandwidth: 168 Gbps per module wavelength of 850 nm. High density footprint: 21.95 mm 18.62 mm size Avagos MiniPOD solution offers system designers two module package options to optimize their cable manage- Two package options to optimize internal cable ment and board layout. AFBR-814RxyZ Tx/AFBR-824RxyZ management and system layout Rx is used with round multi-lane cable assemblies for Separate transmitter and receiver modules applications requiring multiple turns of the jumper cable 850 nm VCSEL array in transmitter PIN array in receiver inside the chassis. AFBR-814FxyZ Tx/AFBR-824FxyZ Rx is used with flat ribbon cable assemblies, allowing dense Using OM4 4700 MHzkm fiber: links up to 150 m, from tiling of the modules as the jumper cables can be thread 10.3125 Gbps to 11.5 Gbps, 100 m 12.5 Gbps, and 50 under the dust-cap of the next module. This top mounted m 14.0625 Gbps optical connection maximizes board layout density by Optical Interface: PRIZM LightTurn optical turn 112 eliminating board space lost to the optical connector and ribbon fiber connector strain relief. Pluggable electrical interface: 99 MEG-Array for ease The electrical interface uses a 99 MEG-Array connector of design and manufacturability with 1.27 mm pitch Low Power consumption: 3.7 W Max per Transmitter/ Figure 1. MiniPOD Transmitter and Receiver Modules with a) Round Cable and b) Flat Cable: Figure 2. MiniPOD Transmitter and Receiver shown with and without dust covers (White = Tx, Black = Rx). flat ribbon cable modules in a tiled arrangement example. Part Number Ordering Options Transmitter Base Part Number AFBR-814FxyZ Modules for use with Flat Ribbon Jumper Cable Receiver Base Part Number AFBR-824FxyZ Transmitter Base Part Number AFBR-814RxyZ Modules for use with Round Jumper Cable Receiver Base Part Number AFBR-824RxyZ Where: 81 = Transmitter 82 = Receiver F/R: R = module package for use with round cable F = module package for use with Flat ribbon cable V: R= module package for use with round cable F = module package for use with Flat ribbon cable x: N = No Heat Sink, H = Pin Clip-on Heat Sink attached Y: 1 = 100m Key Product Parameters The Avago Technologies MiniPOD modules operate at 850 nm and are compliant to the Multi-mode Fiber optical specs in clause 86 and relevant electrical specs in annex 86A of the IEEE 802.3ba specifications. Parameter Value Units Notes Data rate per lane 14 Gbps As per 802.3ba: 100GBASE-SR10 and nPPI specifications Number of operational lanes 12 100GbE operation utilizes the middle ten lanes (Rx and Tx) of the 12 physically defined lanes Link Length 150 m To 11.5 Gbps: 4700 MHzkm 50 m MMF (OM4) 100 m 2000 MHzkm 50 m MMF (OM3) 100 m To 12.5 Gbps: 4700 MHzkm 50 m MMF (OM4) 75 m 2000 MHzkm 50 m MMF (OM3) 50 m To 14.0625 Gbps: 4700 MHzkm 50 m MMF (OM4) 35 m 2000 MHzkm 50 m MMF (OM3) Operating Temperature Range 0-70 C Case Temperature Power Supply Voltage 3.3 and 2.5 V Management Interface Two-Wire Serial Compatible with industry standard two-wire serial protocol scaled for 1.2 volt LVCMOS. It can also tolerate 3.3V LVTTL. Laser Output Power Class 3R (Class 1M Without optical connector. at Fiber Output) Electrical Interface MEG-Array 1.27mm pitch and 4mm contact mate height Module Dimensions 18.6 x 22 x 14.5 mm Flat Ribbon Cable Housing 18.6 x 22 x 15.6 mm Round Ribbon Cable Housing Laser Safety Notice * A Class 3R laser is considered safe if handled carefully, with restricted beam viewing. With a class 3R laser the maximum permissible exposure can be exceeded, but with a low risk of injury. 2