FNPM1N083HRF Fraen

FNP Lens series for Nichia NS6x083T LEDs High efficiency 4 beams available Easy assembly The FNP lens offers low-profile lenses specifically designed for the NS6x083T Power LEDs from Nichia Corporation. A software-optimized aspheric profile enables the generation of several different beam output patterns: narrow, medium, elliptical, and wide beams. The high collection efficiency reaches 85% of the total flux emitted by the LEDs. Lens holders are available in black PC, and provide the proper alignment between the LEDs and the lenses, and set the For technical information about Nichia NS6x083T LEDs please correct distance between the lens and refer to the Nichia Power LEDs datasheet web-link: LED. General Characteristics Lens Material Optical Grade PMMA Holder Material PC, black color Operating Temperature range -40deg C / + 80 deg C Storage Temperature range -40deg C / + 80 deg C Average transmittance in visible spectrum (400 700nm) >90%, as measured using 3mm thick Optical Grade PMMA. Please note that flow lines and weld lines on the external surfaces of the lenses are acceptable if the optical performance of the lens is within the specification described in the section OPTICAL CHARACTERISTICS IMPORTANT NOTE Lenses handling and cleaning: Handling: Always use gloves to handle lenses and/or handle the lenses only by the flange. Never touch the outside surfaces of the lenses with fingers finger oils and contamination will absorb or refract light. Cleaning: Clean lenses only if necessary. Use only soap and water to clean the surfaces and lenses. Never expose the lenses to solvents such as alcohol, as it will damage the plastic. Scope This datasheet provides information about the FNP series lenses: FNP-N1-N083-0R FNP-M1-N083-0R FNP-W1-N083-0R FNP-E1-N083-0R and lens assemblies: FNP-N1-N083-HRF FNP-M1-N083-HRF FNP-W1-N083-HRF FNP-E1-N083-HRF 2/8 FNP series lenses for Nichia NS6x083T LEDs