RECTANGULAR CONNECTORS FCN360 Series DISCONTINUED September 2020 FCN-365J FCN-365P FCN-364P FCN-364P FCN-364J FCN-364J FCN-365J FCN-364P FCN-365P FCN-364J FCN-362J FCN-363J FCN-365P FCN-367J FCN-361P FCN-365P FCN-364P FCN-365J With type B cover FCN-364P FCN-365P FCN-364J With type E cover With type J1 cover Specifications Dimensions are in millimeters (inches) Terms in Selection Table (Example) Model 700 series Contact pitch Denotes a pitch between adjacent contacts or pitch between rows. 2.54 mm (0.100 in.) (pitch between adjacent contacts) x 2.54 mm (0.100 in.) (pitch between rows) Appearance Number of contacts Denotes the numbers of contacts of available connectors. Connection type Denotes the connection type of the cable or PC Contact pitch 2.54 2.54 board connection section. 10, 14, 16, 20, 26, 30, Number of contacts Plating 34, 40, 50, 60 Denotes the contact plating specification. Solder eyelet (tail shape) Specifications Wire-wrapping P 0.64 (post cross section) J Operating temperature range Crimping (applicable The connector can be used within the specified AWG No.) temperature range. Straight, throughhole (PC 0.8, 2.54 2.54 Current rating board hole dimensions) Maximum current that can flow through one Right-angle, throughhole P 0.8, 2.54 2.54 connector pin (PC board hole dimensions) J IDC (applicable P 28, Flat cable Voltage rating AWG No.) J 28, Flat cable Maximum voltage that can be applied to a connector Gold Silver Plating Contact resistance Tin Resistance observed at the contact part when 0.3 A (or 0.1 A) flows at 6 VDC with the connectors Operating temperature 55C to +105C mated range Current rating DC 1 A Insulation resistance Resistance to the leakage current flowing through the insulator (inside or surface of the insulator) AC 250 V Voltage rating when 500 VDC is applied across adjacent pins of a connector 20 m max. Contact resistance (DC 6 V, 0.1 A) Dielectric withstanding voltage Insulation resistance 1,000M min. Applying the indicated voltage across adjacent (DC 500 V) pins of a connector for one minute does not cause Dielectric withstanding any abnormality (damage or cracks in insulator). AC 500 V voltage (for 1 minute) Insulation material Polyester Insulating material, cleaning with chlorothene cleaning with Chlorothene cleaning possible Denotes the insulating material used, and indicates whether the insulating material can be FCN-705P050-AU/M cleaned with chlorothene. Part number (example) FCN-707J050-AU/B Part number EMI protection cover Remarks Some part numbers are indicated as examples. provided 4-2 Structure Specification Pin type