Delivering Next Generation Technology Series FPLR12SR7510*A 6-14Vdc Input, 10A, 0.7525-5.5Vdc Output The Series of non-isolated dc-dc converters deliver exceptional electrical and thermal performance in industry-standard footprints for Point-of-Load converters. Operating from a 6.0Vdc-14Vdc input, these are the converters of choice for Intermediate Bus Architecture and Distributed Power Architecture applications that require high efficiency, tight regulation, and high reliability in elevated temperature environments with low airflow. DC/DC POL FPLR12SR7510*A Features 6V14V IBADPA Delivers up to 10A (55.0W) 10A (55.0W) The FPLR12SR7510*A converter of the High efficiency, no heatsink required Series delivers 10A of output current at a tightly - regulated programmable output voltage of 0.7525Vdc No derating up to 85 to 5.5Vdc. The thermal performance of the 85 FPLR12SR7510*A is best-in-class: No derating is Negative and Positive ON/OFF logic needed up to 85, under natural convection. ON/OFF FPLR12SR7510*A0.7525V Industry-standard SMD footprint 5.5VdcFPLR12SR7510*A SMD 85 RoHS compliance RoHS This leading edge thermal performance results from Small size and low profile: 1.30 x 0.53 x 0.327 electrical, thermal and packaging design that is nominal optimized for high density circuit card conditions. (33.0 x 13.4 x 8.3mm) Extremely high quality and reliability are achieved Coplanarity less than 0.004 through advanced circuit and thermal design 0.1mm techniques and FDKs state of the art in-house Tape and reel packaging manufacturing processes and systems. Programmable output voltage via external resistor FDK No minimum load required Start up into pre-biased output Applications Remote ON/OFF Intermediate Bus Architecture ON/OFF Auto-reset output over-current protection Telecommunications : Auto-reset over-temperature protection Data/Voice processing : UL60950 recognition in U.S. & Canada, and CB Distributed Power Architecture Scheme certification per IEC/EN60950 UL60950CB Scheme Computing (Servers, Workstations) All materials meet UL94, V-0 flammability rating () UL94 V-0 Page 1 of 27 Delivering Next Generation Technology Series FPLR12SR7510*A 6-14Vdc Input, 10A, 0.7525-5.5Vdc Output Electrical Specifications All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted. Conditions: Ta=25degC, Airflow=200LFM (1.0m/s), Vin=12Vdc, Vout=0.7525-5.5Vdc, unless otherwise specified. PARAMETER NOTES MIN TYP MAX UNITS 1 ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous -0.3 15 Vdc Operating Temperature Ambient temperature -40 85 C Storage Temperature -55 125 C Output Voltage 0.7525 5.5 Vdc FEATURE CHARACTERISTICS Switching Frequency 320 kHz Output Voltage Programming Range By external resistor. See trim Table-1 0.7525 5.5 Vdc Remote Sense Compensation 0.5 Vdc Turn-On Delay Time Full resistive load with Vin (module enabled, then Vin applied) From Vin=Vin(min) to 0.1*Vout(nom) 5.0 ms with Enable (Vin applied, then enabled) From enable to 0.1*Vout(nom) 5.0 ms Rise Time (Full resistive load) From 0.1*Vout(nom) to 0.9*Vout(nom) 5.0 ms ON/OFF Control (Negative) Module Off 2.4 Vin Vdc Module On -5 0.8 Vdc ON/OFF Control (Positive) Module Off -5 Vin-2.7 Vdc Module On Vin-1.0 Vin Vdc 1 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings may lead to degradation in performance and reliability of the converter and may result in permanent damage. Page 2 of 27