Delivering Next Generation Technology Series FPLR12TR7516*A 6-14Vdc Input, 16A, 0.7525-5.5Vdc Output The Series of non-isolated dc-dc converters deliver exceptional electrical and thermal performance in industry-standard footprints for Point-of-Load converters. Operating from a 6.0Vdc-14Vdc input, these are the converters of choice for Intermediate Bus Architecture and Distributed Power Architecture applications that require high efficiency, tight regulation, and high reliability in elevated temperature environments with low airflow. DC/DC POL FPLR12TR7516*A 6V14V Features IBADPA Delivers up to 16A (88.0W) The FPLR12TR7516*A converter of the 16A (88.0W) Series delivers 16A of output current at a tightly High efficiency, no heatsink required regulated programmable output voltage of 0.7525Vdc - to 5.5Vdc. The thermal performance of the FPLR12TR7516*A is best-in-class: No derating is No derating up to 85 needed up to 85, under natural convection. 85 Negative and Positive ON/OFF logic FPLR12TR7516*A0.7525V ON/OFF 5.5VdcFPLR12TR7516*A 85 Industry-standard SIP pin-out SIP RoHS compliance This leading edge thermal performance results from RoHS electrical, thermal and packaging design that is Small size and low profile:2.00 x 0.535 x 0.315 optimized for high density circuit card conditions. nominal Extremely high quality and reliability are achieved (50.8 x 13.6 x 8.0mm) through advanced circuit and thermal design techniques and FDKs state of the art in-house Programmable output voltage via external resistor manufacturing processes and systems. No minimum load required FDK Start up into pre-biased output Remote ON/OFF ON/OFF Applications Auto-reset output over-current protection : Intermediate Bus Architecture Auto-reset output over-temperature protection Telecommunications High reliability, MTBF = 1 Million Hours : MTBF = 1 Million Hours Data/Voice processing UL60950 recognition in U.S. & Canada, and CB Distributed Power Architecture Scheme certification per IEC/EN60950 UL60950CB Scheme Computing (Servers, Workstations) All materials meet UL94, V-0 flammability rating () UL94 V-0 Page 1 of 26 Delivering Next Generation Technology Series FPLR12TR7516*A 6-14Vdc Input, 16A, 0.7525-5.5Vdc Output Electrical Specifications All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted. Conditions: Ta=25degC, Airflow=200LFM (1.0m/s), Vin=12Vdc, Vout=0.7525-5.5Vdc, unless otherwise specified. PARAMETER NOTES MIN TYP MAX UNITS 1 ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous -0.3 15 Vdc Operating Temperature Ambient temperature -40 85 C Storage Temperature -55 125 C Output Voltage 0.7525 5.5 Vdc FEATURE CHARACTERISTICS Switching Frequency 320 kHz Output Voltage Programming Range By external resistor. See trim table-1 0.7525 5.5 Vdc Remote Sense Compensation 0.5 Vdc Turn-On Delay Time Full resistive load with Vin (module enabled, then Vin applied) From Vin=Vin(min) to 0.1*Vout(nom) 5.0 ms with Enable (Vin applied, then enabled) From enable to 0.1*Vout(nom) 5.0 ms Rise Time (Full resistive load) From 0.1*Vout(nom) to 0.9*Vout(nom) 5.0 ms ON/OFF Control (Negative) Module Off 2.4 Vin Vdc Module On -5 0.8 Vdc ON/OFF Control (Positive) Module Off -5 Vin-2.7 Vdc Module On Vin-1.0 Vin Vdc 1 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings may lead to degradation in performance and reliability of the converter and may result in permanent damage. Page 2 of 26