FPMR12TR7505PA Fujitsu

Delivering Next Generation Technology Series FPMR12TR7505*A 6-14Vdc Input, 5A, 0.7525-5.5Vdc Output The Series of non-isolated dc-dc converters deliver exceptional electrical and thermal performance in industry-standard pin-out for Point-of-Load converters. Operating from a 6.0Vdc-14Vdc input, these are the converters of choice for Intermediate Bus Architecture and Distributed Power Architecture applications that require high efficiency, tight regulation, and high reliability in elevated temperature environments with low airflow. FPMR12TR7505*A DC/DC POL Features 6V14V Delivers up to 5A (27.5W) IBADPA 5A(27.5W) The FPMR12TR7505*A converter of the High efficiency, no heatsink required - Series delivers 5A of output current at a tightly regulated programmable output voltage of 0.7525Vdc No derating up to 85C to 5.5Vdc. The thermal performance of the 85 FPMR12TR7505*A is best-in-class: No derating is Negative and Positive ON/OFF logic needed up to 85C, under natural convection. ON/OFF FPMR12TR7505*A0.7525V Industry-standard SIP pin-out 5.5VdcFPMR12TR7505*A 85 RoHS compliance RoHS This leading edge thermal performance results from Small size and low profile: 0.90 x 0.40 x 0.195 electrical, thermal and packaging design that is nominal optimized for high density circuit card conditions. (22.9 x 10..2 x 4.95mm) Extremely high quality and reliability are achieved Programmable output voltage via external resistor through advanced circuit and thermal design techniques and FDKs state of the art in-house No minimum load required manufacturing processes and systems. Start up into pre-biased output FDK Remote ON/OFF ON/OFF Auto-reset output over-current protection : Applications Auto-reset over-temperature protection Intermediate Bus Architecture High reliability, MTBF = 1 Million Hours : MTBF = 1 Million Hours Telecommunications UL60950 recognition in U.S. & Canada, and CB Scheme certification per IEC/EN60950 Data/Voice processing UL60950CB Scheme All materials meet UL94, V-0 flammability rating Distributed Power Architecture UL94 V-0 Computing (Servers, Workstations) () Delivering Next Generation Technology Series FPMR12TR7505*A 6-14Vdc Input, 5A, 0.7525-5.5Vdc Output Electrical Specifications All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted. Conditions: Ta=25degC, Airflow=200LFM(1.0m/s), Vin=12Vdc, Vout=0.7525-5.5Vdc, unless otherwise specified. PARAMETER NOTES MIN TYP MAX UNITS 1 ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous -0.3 15 Vdc Operating Temperature Ambient temperature -40 85 C Storage Temperature -55 125 C Output Voltage 0.7525 5.5 Vdc FEATURE CHARACTERISTICS Switching Frequency 320 kHz Output Voltage Programming Range By external resistor, See trim Table-1 0.7525 5.5 Vdc Turn-On Delay Time Full resistive load with Vin (module enabled, then Vin applied) From Vin=Vin(min) to 0.1*Vout(nom) 5.0 ms with Enable (Vin applied, then enabled) From enable to 0.1*Vout(nom) 5.0 ms Rise Time (Full resistive load) From 0.1*Vout(nom) to 0.9*Vout(nom) 5.0 ms ON/OFF Control (Negative) Module Off 2.4 Vin Vdc Module On -5 0.8 Vdc ON/OFF Control (Positive) Module Off -5 Vin-2.7 Vdc Module On Vin-1.0 Vin Vdc 1 1 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings may lead to degradation in performance and reliability of the converter and may result in permanent damage.