FTP-628MCL053/054 BATTERY DRIVEN, FTP-608 Series 2 HIGH SPEED THERMAL PRINTER FTP-628MCL053/054 n OVERVIEW The FTP-628 MCL Series are battery driven high-speed ultracompact printers with a 2-inch paper width equivalent. Paper can be easily set using our unique platen release mechanism. The FTP-628 MCL Series can be used for a variety of applications, such as portable terminals, POS, ticket issuing terminals, label printers, banking terminals, and measurement and medical equipment. n HIGHLIGHTS Ultra compact Height 15.5 mm, width 69.6 mm, depth 34.3 mm High speed printing It can print at 80 mm/s (640 dotlines/s) maximum by using Fujitsu s unique head drive control. High resolution printing / Kanji supported 8 dots/mm of resolution printing is possible. Auto paper loading Our unique platen release mechanism allows a wide paper route even if the printer is ultra-compact, so paper can be easily inserted. Conventional auto loading is also available. Two types of paper routes Front or bottom feed, depending on the paper route. Easy mounting Wiring for the head, motor, sensor are housed within one flexible cable (053 , 054) or in two cables (051, 052). The mechanism can be secured by one hook and two screws at two locations, making mounting easy. RoHS compliant 1FTP-628MCL053/054 n PART NUMBERS Part Number Printer mechanism FTP-628MCL053 (front paper insertion with head open detection switch and knob FTP-628MCL054 (bottom paper feed insertion with head open detection switch) LSI for driving FTP-628CU301R (ANK only) FTP-628CU601R Interface board Parallel FTP-628DCL300 (Centronics) Serial FTP-628DSL305 (RS232C) FTP-628DSL603 (hi-speed RS232C) USB FTP-628DSL602R (V2.0) Interface cables Parallel FTP-628Y202 Serial FTP-628Y302 Power cable Head, motor FTP-628Y403 n SPECIFICATIONS Item Specifications Part number FTP-628MCL053/054 Printing method Thermal-line dot method Dot structure 384 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)Dot density Dot pitch (Vertical) 0.125 mm (8 dots/mm)Line feed pitch Effective printing area 48 mm Number of columns ANK 32 columns/line (maximum 12 x 24 dot font) +0 Paper width 58 mm -1 Paper thickness 60 to 100 m (some paper in this range may not be used because of paper characteristics) Printing Speed Maximum 80mm/sec. (640 dot line/sec.) at 8.5V Alphanumeric, katakana: 159 types Character types International and special characters: 195 types JIS Kanji level 1, level 2, non-Kanji (supported only by FTP-628DSL228, DCL208): about 6800 types 12 24 dots, (1.54 3.0 mm), 32 columns: alphanumeric, katakana Character, dimensions (W H), number of 24 24 dots, (3.0 3.0 mm), 16 columns: alphanumeric, katakana, Kanji columns 8 16 dots, (1.0 2.0 mm), 48 columns: alphanumeric, katakana 16 16 dots, (1.0 2.0 mm), 24 columns: alphanumeric, katakana, Kanji 2