FTR-C1CA012G Fujitsu

FTR-K1 SERIES POWER RELAY 2 POLES-2A High insulation/wide gap FTR-C1 Series FEATURES 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,500V between open contacts 5,000V between coil & contact Complies with Telcordia (former Bellcore) 2nd level surge Dielectric strength: 1,500VAC between open contacts 3,000VAC between coil and contact Dimensions of large contact gap relay Height: 9.4mm maximum (THT) 9.7mm maximum (SMT) Length: 15.2mm maximum Width: 7.7mm maximum Conforms to IEC60950/ EN60950/UL1950/CSA C 22.2 No. 950 working voltage 250V (supplementary) High insulation: Clearance: min 2.0mm (coil and contacts) Creepage: min 2.5mm (coil and contacts) Low power consumption 280mW (latching type 140mW) RoHS compliant. Please see page 9 for more information Plastic sealed PARTNUMBER INFORMATION FTR-C1 C A 012 G - B05 Example (a) (b) (c) (d) (e) (f ) (a) Relay type FTR-C1 : FTR-C1-Series (b) C : Through hole type G : Surface mount type S : Surface mount type reduced mounting area (c) Coil type / enclosure A : Standard type : Single coil latching type B (d) Coil rated voltage 012 : 3.....24 VDC Coil rating table at page 3 (e) Contact material G : Gold plated silver palladium (stationary contact) Silver palladium (movable contact) (f) Tape / reel version Nil : Tube packing : Tape / reel packing, only available for SMT type B05 Actual marking does not carry the type name :FT E.g.: Ordering code: FTR-C1CA012G Actual marking: C1CA012G 1FTR-K1 SERIES FTR-C1 SERIES SPECIFICATION Item Non-latching Latching FTR-C1 ( ) A FTR-C1 ( ) B Contact Data Configuration 2 form C Construction Bifurcated Material Gold plated silver palladium (stationary contact) Silver palladium (movable contact) Resistance (Initial) Max. 150m at 1A, 6VDC Contact rating resistive 1A, 30VDC / 0.3A, 125VAC Max. Switching Voltage 250VAC / 220VDC Max. Switching Power 62.5VA / 30W Max. Carry Current 2A Min. Switching Load * 0.01mA, 10mVDC 6 Life Mechanical Min. 10 x 10 operations 3 operations at 0.3A, 125VAC / Min. 100 x 10 Electrical (resistive) 1A, 30VD Coil Data Rated Power 280 to 300mW 140 to 180mW Operate Power 158 to 162mW 158 to 162mW Pulse width - Min. 20ms Operating temp range -40C to +85C (no frost) Storage temperature / humidity -40C to +85C / 5% to 85% RH (no frost) Timing Data Operate (at nominal voltage) Max. 6ms (without bounce) Release (at nominal voltage) Max. 6ms (without bounce) Insulation Resistance (Initial) Min. 1,000M at 500VDC Open contacts 1,500VAC (50/60Hz) 1min Adjacent contacts 1,500VAC (50/60Hz) 1min Dielectric strength Contacts to coil 3,000VAC (50/60Hz) 1min Surge strength Contacts to coil 5,000V, 2 x 10s Open contacts 0.6mm Clearance Adjacent contacts 1.0mm Contacts to coil 2.0mm Open contacts 0.6mm Creepage Adjacent contacts 1.0mm Contacts to coil 2.5mm Other Misoperation>1us 10 to 55 to 10 Hz single amplitude 1.65mm Vibration Resistance Endurance 10 to 55 to 10 Hz single amplitude 2.5mm 2 Misoperation>1us Min. 500m/s (11+/-1ms) Shock 2 Endurance Min. 1,000m/s (6+/-1ms) Weight Approximately 2g Sealing RT III (plastic sealed) * Minimujm switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected 2 reliability levels.