POWER RELAY
2 POLES - 5A Low Profile Type
FTR-F1 Series
FEATURES
Low profile (height: 16.5mm)
DPST/DPDT 5A
High insulation
(due to its reinforced insulation construction)
Insulation Distance (between coil and contacts): 8mm min.
Dielectric strength : 5,000 VAC
Surge strength : 10,000 V
Glow wire compliant type available which satisfies GWT
required for relay in IEC/EN60335-1
Pin configuration compatible to VB
UL, CSA, VDE, CQC recognized
RoHS compliant (Please see page 6 for more information)
Part Numbers
[Example] FTR-F1 - A A 005 V - GW
(a) (b) (c) (d) (e) (f)
(a) Relay type FTR-F1 : FTR-F1 series
(b) Contact configuration A : 2 form A (SPST-NO)
C : 2 form C
(c) A : Standard type (530mW)
Coil type / enclosure
D : High sensitivity type (400mW contact material V type only)
(d) Coil rated voltage 005 : 1.5....110VDC
Coil rating table at page 3
(e) Contact material / TV type V : Gold plated silver alloy(standard type)
T : Gold plated silver alloy
(TV-3 rating type, only for 2 form A standard coil type)
(f) Special type Nil : Standard type
RG : Transparent cover type
GW : Comply with GWEPT (IEC60695-2-11)
Actual marking does not carry the type nameLFT
E.g.: Ordering code:FTR-F1AA005, actual marking:F1AA005
Note: Special type -GW is not applied for -RG.
1FTR-F1 Series
Specifications
Item Standard type TV-3 rating Sensitive type Remarks / conditions
F1 (A, C) A F1 AA ( ) T F1 (A, C) D
( ) V ( ) V
Contact Configuration 2 form A 2 form A 2 form A
data (DPST-NO) (DSDT-NO) (DPST-NO)
2 form C 2 form C
(DPDT)
Construction Single
Material Movable: Gold plate silver tin oxide (AgSnO )
2
Stationary: Silver tin oxide
Resistance Max.100m at 6VDC, 1A Initial
Contact rating 5A, 250VAC / 24VDC Resistive
Max. carrying current 7A
Max. switching voltage 400VAC, 300VDC
Max. switching power 1250VA / 120W
*1
Min. switching load 10 mA, 5VDC
o
Coil Rated power (20 C) 530mW, 110V type: 550mW 400mW
o
Operate power (20 C) 260mW, 110V type: 270mW 225mW
Operating temperature range -40C ~ +75C (at rated voltage) No frost
-40C ~ +70C (Transparent cover type, -RG)
Timing Operate Max. 15ms without bounce, no diode
data
Release Max. 5ms without bounce, no diode
Life Mechanical Min. 20 x 10 operations
Electrical AC contact rating Min. 100 x 103 operations At rated load
(resistive)
DC contact rating Min. 100 x 103 operations At rated load
Lamp load (TV-3) - 25 x 103 oper- -
ations min.
Insula- Insulation resistance Min. 1000M at 500VDC
tion
Dielectric Open contacts 1000VAC (50/60Hz), 1 minute
strength
Coil contact 5000VAC (50/60Hz), 1 minute
Adjecent contacts 3000VAC (50/60Hz), 1 minute
Surge strength Coil to contacts 10000V / 1.2 x 50s standard wave
Clearance 8mm
Creepage 8mm
EN61810-1, Voltage 250V
VDE0435
Pollution 3
Material group III a
Category C / 250V (reference voltage) (VDE 0110b)
Other Vibration resis- Misoperation 10Hz ~ 55Hz ~ 10Hz single amplitude
tance 0.825mm
Endurance 10Hz ~ 55Hz ~ 10Hz single amplitude
1.65mm
Shock resis- Misoperation Min. 100m/s (11 1ms)
tance
Endurance Min. 1,000m/s (6 1ms)
Dimensions / weight 12.8 x 29.0 x 16.5 mm / approx. 12.0g
Sealing Plastic sealed RTIII
*1
: Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load
before production since reference values may vary according to switching frequencies, environmental contions and
2
expected reliability levels.