FTR-F1CA009V Fujitsu

POWER RELAY 2 POLES - 5A Low Profile Type FTR-F1 Series FEATURES Low profile (height: 16.5mm) DPST/DPDT 5A High insulation (due to its reinforced insulation construction) Insulation Distance (between coil and contacts): 8mm min. Dielectric strength : 5,000 VAC Surge strength : 10,000 V Pin configuration compatible to VB UL, CSA, VDE, CQC recognized RoHS compliant (Please see page 6 for more information) Part Numbers Example FTR-F1 - A A 005 V - RG (a) (b) (c) (d) (e) (f) (a) Relay type FTR-F1 : FTR-F1 series (b) Contact configuration A : 2 form A (SPST-NO) C : 2 form C (c) A : Standard type (530mW) Coil type / enclosure D : High sensitivity type (400mW contact material V type only) (d) Coil rated voltage 005 : 1.5....110VDC Coil rating table at page 3 (e) Contact material / TV type V : Gold plated silver alloy(standard type) T : Gold plated silver alloy (TV-3 rating type, only for 2 form A standard coil type) (f) Special type Nil : Standard type RG : Transparent cover type Actual marking does not carry the type nameLFT E.g.: Ordering code:FTR-F1AA005, actual marking:F1AA005 1FTR-F1 Series Specifications Item Standard type TV-3 rating Sensitive type Remarks / conditions F1 (A, C) A F1 AA ( ) T F1 (A, C) D ( ) V ( ) V Contact Configuration 2 form A 2 form A 2 form A data (DPST-NO) (DSDT-NO) (DPST-NO) 2 form C 2 form C (DPDT) Construction Single Material Movable: Gold plate silver tin oxide (AgSnO ) 2 Stationary: Silver tin oxide Resistance Max.100m at 6VDC, 1A Initial Contact rating 5A, 250VAC / 24VDC Resistive Max. carrying current 7A Max. switching voltage 400VAC, 300VDC Max. switching power 1250VA / 120W *1 Min. switching load 10 mA, 5VDC o Coil Rated power (20 C) 530mW, 110V type: 550mW 400mW o Operate power (20 C) 260mW, 110V type: 270mW 225mW Operating temperature range -40C ~ +75C (at rated voltage) No frost -40C ~ +70C (Transparent cover type, -RG) Timing Operate Max. 15ms without bounce, no diode data Release Max. 5ms without bounce, no diode Life Mechanical Min. 20 x 10 operations Electrical AC contact rating Min. 100 x 103 operations At rated load (resistive) DC contact rating Min. 100 x 103 operations At rated load Lamp load (TV-3) - 25 x 103 oper- - ations min. Insula- Insulation resistance Min. 1000M at 500VDC tion Dielectric Open contacts 1000VAC (50/60Hz), 1 minute strength Coil contact 5000VAC (50/60Hz), 1 minute Adjecent contacts 3000VAC (50/60Hz), 1 minute Surge strength Coil to contacts 10000V / 1.2 x 50s standard wave Clearance 8mm Creepage 8mm EN61810-1, Voltage 250V VDE0435 Pollution 3 Material group III a Category C / 250V (reference voltage) (VDE 0110b) Other Vibration resis- Misoperation 10Hz ~ 55Hz ~ 10Hz single amplitude tance 0.825mm Endurance 10Hz ~ 55Hz ~ 10Hz single amplitude 1.65mm Shock resis- Misoperation Min. 100m/s (11 1ms) tance Endurance Min. 1,000m/s (6 1ms) Dimensions / weight 12.8 x 29.0 x 16.5 mm / approx. 12.0g Sealing Flux proof RTII *1 : Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and 2 expected reliability levels.