FTR-K1 SERIES
POWER RELAY
2 POLES - 5A LOW PROFILE TYPE
FTR-F1 Series
n FEATURES
l Low profile (height: 16.5mm)
l DPST/DPDT 5A, TV-3 rating available
l High insulation
(due to its reinforced insulation construction)
Insulation Distance (between coil and contacts): 8mm min.
Dielectric strength: 5KV
Surge strength: 10KV
l Pin configuration compatible to VB
l UL, CSA, VDE, SEMKO, CQC recognized
l Plastic sealed, RT III
l RoHS Compliant
Please see page 6 for more information
n PARTNUMBER INFORMATION
FTR-F1 A A 005 V - RG
[Example] (a) (b) (c) (d) (e) (f )
(a) Relay type FTR-F1 : FTR-F1 Series
(b) Contact configuration A : 2 form A (SPST-NO)
C : 2 form C
(c) Coil type / enclosure A : Standard type (530mW)
D : High sensitivity type (400mW)
(d) Coil rated voltage 005 : 5....110VDC
Coil rating table at page 3
(e) Contact material / TV type V : Gold plate silver tin oxide (standard type)
T : Gold plate silver tin oxide
(TV-3 rating type, only for 2 form A standard coil type)
(f) Special type Nil : Standard type
RG : Transparent cover type
Actual marking does not carry the type name :FT
E.g.: Ordering code: FTR-F1AA005V Actual marking: F1AA005V
1FTR-K1 SERIES
FTR-F1 SERIES
n SPECIFICATION
Item Standard Type TV-3 rating Sensitive Type
F1 (A,C) A ( ) V F1 AA ( ) T F1 (A,C) D ( ) V
Contact 2 form A 2 form A 2 form A
Data Configuration (DPST-NO) (DSDT-NO) (DPST-NO)
2 form C 2 form C (DPDT)
Construction Single
Material Gold plate silver tin oxide (AgSnO )
2
Resistance (initial) Max. 100mOhm at 1A, 6VDC
Contact rating 5A, 250VAC / 24VDC
Max. carrying current * 7A
Max. switching voltage 400VAC/ 300VDC
Max. switching power 1,250VA, 120W
Min. switching load * 10mA, 5VDC
6
Life Mechanical Min. 20 x 10 operations
3
AC load Min. 100 x 10 operations
3
DC load Min. 100 x 10 operations
Electrical
3
25 x 10
Lamp load (TV-3) - -
operations min.
Coil Data Rated Power (at 20 C) 530mW, 110V type: 550mW 400mW
Operate Power (at 20 C) 260mW, 110V type: 270mW 225mW
-40 to +75 C (no frost)
Operating temperature range
-40 to +70 C (transparent cover type, -RG)
Timing Data Operate (at nominal voltage) Max. 15ms (no diode, without bounce)
Release (at nominal voltage) Max. 5ms (no diode, without bounce)
Insulation Resistance (Initial) Min. 1,000MOhm at 500VDC
Open contacts 1,000VAC (50/60Hz) 1min.
Dielectric strength Coil and contacts 5,000VAC (50/60Hz) 1min.
Adjacent contacts 3,000VAC (50/60Hz) 1 min.
Surge strength Coil and contacts 10.000V/ 1.2 x 50s standard wave
Clearance 8 mm
Creepage 8 mm
EN61810-1, VDE0435 Voltage 250V
Pollution degree 3
Material group IIIa
Category C / 250V (reference voltage) (VDE0110b)
Other Misoperation 10 to 55Hz double amplitude 1.65mm
Vibration Resistance
Endurance 10 to 55Hz double amplitude 3.3mm
Misoperation Min. 100m/s (11 1ms)
Shock
Endurance Min. 1000m/s (6 1ms)
Weight Approximately 13 g
Sealing Sealed RTIII
* 1 When max. carrying current is more than 10A, PCB layout needs to be considered.
* 2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2