FTR-K1 SERIES POWER RELAY FTR-F1 R Series FEATURES DPST/DPDT 8A Low profile power relay (height 16.5 mm) employing unique construction High insulation by employing reinforced insulation construction Insulation distance: 8 mm (between coil and contact) Dielectric strength: 5 kV (between coil and contact) Surge strength: 10 kV (between coil and contact) Glow wire compliant type available which satisfies GWT required for relay in IEC/EN60335-1 UL, CSA, VDE recognized Flux proof sealing, RTII RoHS Compliant Please see page 6 for more information PARTNUMBER INFORMATION FTR-F1 A L 005 R - GW Example (a) (b) (c) (d) (e) (f ) (a) Relay type FTR-F1 : FTR-F1-Series (b) A : 2 form A (SPST-NO) C : 2 form C (DPDT) (c) Coil type / enclosure A : Standard type (530mW) : High sensitive type (400mW) L (d) Coil rated voltage 005 : 1.5...110VDC (High sensitive type: 1.5...48V) Coil rating table at page 3 (e) Contact rating R : 8A (f) Special type Nil : Standard type : Comply with GWEPT (IEC/EN60695-2-11) GW : Transparent cover type RG Actual marking does not carry the type name :FT E.g.: Ordering code: FTR-F1AL005R Actual marking: F1AL005R 1FTR-K1 SERIES FTR-F1 SERIES n SPECIFICATION Item Standard type Transparent cover F1 (A, C) L ( ) R F1 (A, C) L ( ) R - RG Contact Configuration 2 form A (DPST-NO), 2 form C (DPDT) Data Construction Single Movable: Gold plate silver tin oxide Stationary: Silver tin Material oxide Resistance (initial) Max. 100m at 1A, 6VDC Contact rating 8A, 250VAC / 24VDC 1 Max. carrying current * 8A Max. switching voltage 400VAC/ 300VDC Max. switching power 2,000VA, 192W 2 Min. switching load * 10mA, 5VDC 6 Life Mechanical Min. 20x 10 operations 3 AC load Min. 50 x 10 operations Electrical 3 DC load Min. 50 x 10 operations Coil Data Rated Power (at 20 C) Standard type: 530~550mW /High sensitive type: 400mW Operate Power (at 20 C) Standard type: 260~270mW /High sensitive type: 225mW Operating temperature range -40 to +75 C (no frost) -40 to +70 C (no frost) Timing Data Operate (at nominal voltage) Max. 15ms (no diode, without bounce) Release (at nominal voltage) Max. 5ms (no diode, without bounce) Insulation Resistance (Initial) Min. 1,000M at 500VDC Open contacts 1,000VAC (50/60Hz) 1min. Dielectric strength Coil and contacts 5,000VAC (50/60Hz) 1min. Adjacent contacts 3,000VAC (50/60Hz) 1 min. Surge strength Coil and contacts 10.000V/ 1.2 x 50s standard wave Clearance 8 mm Creepage 8 mm EN61810-1, VDE0435 Voltage 250V Pollution degree 3 Material group IIIa Category C / 250V (reference voltage) (VDE0110b) Other Misoperation 10 to 55 to 10 Hz single amplitude 0.825mm Vibration Resistance Endurance 10 to 55 to 10 Hz single amplitude 1.65mm Misoperation Min. 100 m/s (11 1ms) Shock Endurance Min. 1,000 m/s (6 1ms) Weight Approximately 12 g Sealing Flux proof, RTII * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2