FTR-F3AA012E Fujitsu

FTR-K1 SERIES POWER RELAY 1 POLE - 3A/5A Slim Type Relay FTR-F3 Series n FEATURES l High density mounting 2 Slim type with 7mm width and 142mm mounting space 2 1C type height 15mm and 164 mm mounting space 2 right angle type height 7mm, 330 mm mounting space l High insulation Insulation distance: minimum 6mm (7mm for 1C and right angle type) between coil and contact (conforms to IEC 60065) Dielectric strength: 4KV Surge strength: 10KV l Cadmium free contact for eco-program l Safety standards UL, CSA, VDE, SEMKO, CQC l Plastic sealed relay, RTIII l RoHS compliant Please see page 7 for more information n PARTNUMBER INFORMATION FTR-F3 A A 012 V - HA Example (a) (b) (c) (d) (e) (f) (a) Relay type FTR-F3 :FTR-F3-Series (b) Cont act configuration A : 1 form A , straight terminals C : 1 form C, straight terminals P : 1 form A, right angle terminals (c) Coil type (power) A : 200mW, 3A and 5A types, FTR-F3 (A P) A (...) E (-HA) (-KS) : 280mW, TV3 and TV5 types, FTR-F3 (A P) A (...) (V T) : 360mW, 1 form C type, FTR-F3CA (...) E (d) Coil rated voltage 012 : 5.....24 VDC Coil rating table at page 3 (e) Contact material V : AgSnO TV5 type, 1 form A type only (280mW coil) 2 T : AgSnO TV3 type, 1 form A type only (280mW coil) 2 E : AgNi 3A and 5A types only (not for TV3 and TV5 types) (f) Contact rating Nil : 3A type and V and T types only HA : 5A type (for type FTR-F3AA only) (not for TV types) K S : Sealing confirmed (3A type FTR-F3AA (...) E only) Actual marking does not carry the type name :FT E.g.: Ordering code: FTR-F3AA012V Actual marking: F3AA012V 5A 250V~ 5A 30VDC and TV rating marked on relay Ordering code: FTR-F3AA012E-HA Actual marking: F3AA012E 1 5A 250V~ 5A 30VDC marked on relay FTR-F3 SERIES FTR-K1 SERIES n SPECIFICATION Item FTR-F3 3A type 5A type TV3 / TV5 type Contact Data Configuration 1 form A 1 form A 1 form C 1 form A Construction Single Material Silver nickel (AgNi) Ag alloy (AgSnO ) 2 Resistance (initial) Max. 100mOhm at 1A, 6VDC 5A, 250VAC, 30VDC TV3: (120VAC) 3A / 51A / 125VAC Contact rating (resistive) 3A, 125VAC, 30VDC 5A, 250VAC, 30VDC 3A / 50A / 250VAC TV5: (120VAC) 5A / 78A / 125VAC 5A / 80A / 250VAC Max. carrying current 5A 277VAC, Max. switching voltage 277VAC, 30VDC 277VAC, 30VDC 277VAC, 150VDC 150VDC Max. switching power 750VA, 90W 1,250VA, 150W Min. switching load * 10 mA, 5VDC 6 6 Life Min. 5 x 10 Min. 5 x 10 6 6 Mechanical Min. 5 x 10 operations Min. 5 x 10 operations operations operations 3 Min. 100 x 10 operations (3A, 250VAC/30VDC) 3 3 Electrical (at rated load) Min. 200 x 10 operations Min. 100 x 10 operations 3 Min. 50 x 10 operations (5A, 250VAC/30VDC) Coil Data Rated power (20 C) 200mW 200mW 360mW 280mW Operate power 113mW 113mW 200mW 156mW -40 C to +70 C -40 C to +85 C Operating temperature range -40 C to +70 C (no frost) -40 C to +85 C (no frost) (no frost) (no frost) Timing Data Operate (at nominal voltage) Max. 10ms (without bounce, no diode) Release (at nominal voltage) Max. 10ms (without bounce, no diode) Insulation Resistance (initial) Min. 1,000MOhm at 500VDC Open contacts 750VAC (50/60Hz) 1min Dielectric strength Contacts to coil 4,000VAC (50/60Hz) 1min Surge strength Contacts to coil 10,000V / 1.2 x 50s standard wave Clearance 6mm 6mm 7mm 7mm Creepage 6mm 6mm 7mm 7mm Voltage 250V Pollution 2 degree EN61810-1, VDE0435 Material group III Category C / 250V Other Misoperation 10 to 55Hz double amplitude 1.5mm Vibration resistance Endurance 10 to 55Hz double amplitude 1.5mm 2 Misoperation Min. 100m/s (111ms) Shock 2 Endurance Min. 1,000m/s (61ms) Weight Approximately 4g Approx. 4g Approx. 6g Approximately 6g Sealing Plastic sealed RTIII * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual 2 load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels.