FTR-K1 SERIES NOT FOR NEW DESIGN POWER RELAY 1 POLE - 10A Low Profile Type FTR-H1 Series n FEATURES l Working class: B (for IMQ)/ C (for VDE) l Type of service: continuous duty l Low profile (height 16.5 mm) l 1 form A/ 1 form C 10 A, TV-5 rating available l Transparency cover type available l UL class B (130C) wire class l High insulation in small package Insulation distance : 8 mm (between coil and contacts) Dielectric strength : 5,000 VAC Surge strength :10,000 V l Plastic materials - UL94 flame class V-0 UL CTI level class 2 l Plastic sealed relay, RT III l Pin configuration compatible to VS / FBR610 series l UL, CSA, BSI, VDE, SEMKO recognized l Conforms to FIMKO, DEMKO l RoHS compliant Please see page 6 for more information n PARTNUMBER INFORMATION FTR-H1 A A 005 V - RG Example (a) (b) (c) (d) (e) (f) (a) Relay type FTR-H1 : FTR-H1 Series (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (c) Coil type A : Standard type (530mW) D : High sensitive type (400mW - V type only) (d) Coil rated voltage 005 : 5....48VDC Coil rating table at page 3 (e) Contact material / TV type V : Gold plate silver tin oxide (standard type) T : Gold plate silver tin oxide (TV-5 rating type, 1 form A standard) (f) Special type RG : Transparent cover type Actual marking does not carry the type name :FT E.g.: Ordering code: FTR-H1AA005V Actual marking: H1AA005V 1 FTR-H1 SERIES FTR-K1 SERIES NOT FOR NEW DESIGN n SPECIFICATION Item FTR-H1 (AC) A ( ) FTR-H1 AA ( ) T FTR-H1 (AC) D ( ) V Contact 1 form A (SPST-NO) 1 form A 1 form A (SPST-NO) Configuration Data 1 form C (SPDT) (SPST-NO) 1 form C (SPDT) Construction Single Material Movable: gold plate silver tin oxide, stationary: silver tin oxide Resistance (initial) Max. 100mOhm at 1A, 6VDC Contact rating 10A, 250VAC, 30VDC Max. carrying current 14A Max. switching voltage 400VAC, 300VDC Max. switching power 2,500VA, 300W Min. switching load* 10 mA, 5VDC 6 Life Mechanical Min. 20 x 10 operations 3 AC load Min. 100 x 10 operations 3 DC load Min. 100 x 10 operations Electrical 3 Min. 25 x 10 - Lamp load (TV-5) - operations Coil Data Rated power 530 mW 400 mW Operate power 260 mW 230 mW -40 C to +75 C (no frost) (refer to characteristic data) Operating temperature range -40 C to +70 C (transparent cover -RG type) Timing Data Operate (at nominal voltage) Max. 10ms (without bounce) Release (at nominal voltage) Max. 5ms (no diode) Insulation Resistance (initial) Min. 1,000MOhm at 500VDC Dielectric strength Open contacts 1,000VAC (50/60Hz) 1min Contacts to coil 5,000VAC (50/60Hz) 1min Surge strength Coil to contacts 10,000V / 1.2 x 50s standard wave Clearance 8mm Creepage 8mm EN61810-1, VDE0435 Voltage 250V Pollution degree 3 Material group IIIa Category C / 250V Other Misoperation 10 to 55Hz double amplitude 1.65mm Vibration resistance Endurance 10 to 55Hz double amplitude 3.3mm 2 Misoperation Min. 100m/s (111ms) Shock 2 Endurance Min. 1,000m/s (61ms) Weight Approximately 12g Sealing Sealed RT III * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 2