FTR-K1 SERIES POWER RELAY 1 POLE - 10A Relay Type FTR-H2 Series n FEATURES l High density mounting Saves space by 26% compared to FTR-H1 type l High insulation Insulation distance: minimum 6mm between coil and contact Dielectric strength: 4KV Surge strength: 10KV l TV-5 rating l Heat resistance, flammability Class B (130 C) wire class, flammability 94V-0 l Cadmium free contact for eco-program l Safety standards UL, CSA, VDE approved UL/CSA TV-5 rating approved l Flux proof relay, RT II l RoHS compliant Please see page 6 for more information n PARTNUMBER INFORMATION FTR-H2 A K 012 T Example (a) (b) (c) (d) (e) (a) Relay type FTR-H2 : FTR-H2-Series (b) Contact configuration A : 1 form A (SPST-NO) (c) Coil type / enclosure K : Standard type (530mW) L : High sensitive type (250mW) (d) Coil rated voltage 012 : 5.....48 VDC Coil rating table at page 3 (e) Contact material / TV type T : Silver-tin oxide / TV-5 Actual marking does not carry the type name :FT E.g.: Ordering code: FTR-H2AK012T Actual marking: H2AK012T 1FTR-K1 SERIES FTR-H2 SERIES n SPECIFICATION Item H2 AK ( ) T H2 AL ( ) T Contact Data Configuration 1 form A (SPST-NO) Construction Single Material Silver tin oxide (AgSnO ) 2 Resistance (initial) Max. 100m at 6VDC, 1A Contact rating 250VAC / 30VDC ,10A Max. carrying current 10A Max. inrush current 78A 250VAC Max. switching voltage 400VAC / 300VDC Max. switching power 2,500VA / 300W Min. switching load* 100mA, 5VDC 6 Life Mechanical Min. 2 x 10 operations 3 AC contact rating Min. 100 x 10 operations 3 Electrical DC contact rating Min. 100 x 10 operations 3 Lamp load (TV-5) Min. 25 x 10 operations Coil Data Rated Power (20 C) 530mW 250mW Operate Power (20 C) 260mW 160mW Operating temperature range -40 C to +70 C (no frost) Timing Data Operate Max. 15ms (without bounce) Release Max. 5ms (without bounce) Insulation Resistance (Initial) Min. 1,000M at 500VDC Dielectric strength Open contacts 1,000VAC (50/60Hz) 1min Contacts to coil 4,000VAC (50/60Hz) 1min Surge strength Coil to contacts 10,000V / 1.2 x 50s standard wave Clearance 6mm Creepage 6mm DIN EN61810-1, VDE0435 Voltage 250V Pollution degree 2 Material group III Category B / 250V Other Misoperation>1us 10 to 55 to 10 single amplitude 0.75mm Vibration resistance Endurance 10 to 55 to 10 single amplitude 0.75mm Misoperation>1us Min. 200m/s (11 1ms) Shock Endurance Min. 1,000m/s (6 1ms) Weight Approximately 13g Sealing Flux proof RTII * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2