FTR-K1 SERIES POWER RELAY 1 POLE - 6A Slim Type (Medium Load Control) FTR-LY Series n FEATURES l Slim 15.0mm (h) x 5.0 mm (w) x 28.0mm (l) (straight type) 5.0mm (h) x 15.0mm(w) x 28.0mm (l) (right angle type) l 1 form C and 1 form A l Straight and right angle type available 2 l Mounting space: 140mm (straight type), weight: 5.0g l High insulation in small package Insulation distance (between coil and contacts): 8mm (creepage/clearance) Dielectric strength: 4,000 VAC Surge strength: 6,000V l Plastic sealed type RTIII l UL, CSA, VDE compliance l Socket type available l RoHS compliant l Conforms to UL61010-1, UL61010-2-201, IEC/EN61010-1, IEC/EN61010-2-201(max. 277VAC) Please see page 7 for more information n PARTNUMBER INFORMATION FTR-LY A A 005 Y - SK Example (a) (b) (c) (d) (e) (f ) (a) Relay type FTR-LY : FTR-LY-Series (b) Cont act configuration A : 1 form A C : 1 form C P : 1 form A (right angle type) R : 1 form C (right angle type) (c) Coil type A : Standard type (170mW) (d) Coil rated voltage 005 : 5.....60 VDC Coil rating table at page 3 (e) Contact material E : AgNi Y : AgSnO 2 V : AgSnO + Au plating 2 (f) Special type Nil : PCB mounting type SK : Socket mounting type (only cont act configuration A and C Actual marking does not carry the type name :FT andS E.g.: Ordering code: FTR-LYAA005Y-SK Actual marking: LYAA005Y 1FTR-K1 SERIES FTR-LY SERIES n SPECIFICATION Item LY (C,R) A ( ) (Y,E,V) LY (A,P) A ( ) (Y,E,V) Contact Data Configuration 1 form C (SPDT) 1 form A (SPST-NO) Construction Single Material Y: AgSnO / E: AgNi / V: AgSnO + Au plating 2 2 Y, E: Max. 100 m at 6 VDC, 1 A Resistance (initial) V: Max. 30 m at 6 VDC, 1A Contact rating 6A, 250VAC / 24VDC (resistive) Max. carrying current 6A Max. switching voltage 250VAC Max. switching power 1,500VA / 144W Y, E: 100 mA 5 VDC Min. switching load * V: 10mA 5 VDC 6 Life Mechanical Min. 10 x 10 operations 3 Min. 50 x 10 operations (N.O.) 3 Electrical Min. 30 x 10 operations (N.C.) at 6A, 250VAC / 24VDC resistive Coil Data Rated power 170 to 217 mW Operate power 74 to 95 mW Operating temperature range -40 C to +85 C (no frost) Timing Data Operate (at nominal voltage) Max. 8ms (no diode, without bounce) Release (at nominal voltage) Max. 4ms (no diode, without bounce) Insulation Resistance (initial) Min. 1,000M at 500VDC Dielectric strength Open contacts 1,000VAC (50/60Hz) 1min.,10mA detection current Contacts to coil 4,000VAC (50/60Hz) 1min.,10mA detection current Surge strength Coil to contacts 6,000V / 1.2 x 50s standard wave Clearance Min. 8 mm Creepage Min. 8 mm EN61810-1, VDE0435 Voltage 250V Pollution degree 3 Material group III a Category C / 250V Other Misoperation 10 to 55 to 10Hz single amplitude 0.5mm Vibration resistance Endurance 10 to 55 to 10hz single amplitude 0.75mm Misoperation Min. 50m/s (11 1ms) Min. 100m/s (11 1ms) Shock Endurance Min. 1,000m/s (6 1ms) Weight Approximately 5 g Sealing Plastic sealed RTIII * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2