FTR-K1 SERIES SILENT TWIN RELAY for automotive applications 1 POLE x 2 - 25A (for 12V car battery) FTR-P2 Series n FEATURES l Low operating sound An original silent mechanism decreases the propagation of operating sound when mounted on a PCB. (Average sound pressure: 50dB at 5 cm) l Compact, high density package 2 350 mm mounting area l High sensitivity, low power consumption (nominal power consumption: 450 mW) l Simple PCB layout due to internal H-Bridge connections typically used in motor applications. All terminals are on the perimeter l High breaking capability. l Typical applications Power window, Doorlock, Power seat, Wiper (for H-Bridge circuit) l RoHS compliant Please see page 7 for more information n PARTNUMBER INFORMATION FTR-P2 C N 012 W1 Example (a) (b) (c) (d) (e) (a) Relay type FTR-P2 : FTR-P2 Series (b) Cont act configuration C : 1 form C x 2, H-bridge (c) Contact gap N : 0.3mm gap (d) Coil rated voltage 012 : 9.....12VDC Coil rating table at page 2 (e) Contact material W1 : Silver-tin oxide indium Actual marking does not carry the type name:FT E.g.: Ordering code: FTR-P2CN012W1 Actual marking: P2CN012W1 1FTR-K1 SERIES FTR-P2 SERIES n SPECIFICATION Item FTR-P2 Contact Data Configuration 1 form C x 2, H-Bridge Material Silver-tin oxide indium Voltage drop Max. 100mV at 1A , 12VDC Contact rating 14VDC, 25A (motor locked) Max. carr ying current 25A/1 hour (25 C, nominal voltage applied to coil) Max. switching volt age 16VDC (reference) Max. switching current 35A (reference) Min. switching load * 6V, 1A (reference) Life Mechanical Min. 10 million operations Electrical Min. 100k operations (at contact rating) Coil Data Operating temperature range -40 C to +85 C (no frost) Storage temperature range -40 C to +100 C (no frost) Timing Data Operate (at nominal voltage) Max. 10 ms Release (at nominal voltage) Max. 5 ms (without diode), Max. 15ms (with diode) Other 10 to 200Hz, acceleration 44m/s2 (4.5G), Misoperation constant acceleration Vibration resistance (operational) 10 to 200Hz, acceleration 44m/s2 (4.5G), Endurance constant acceleration Misoperation 100 m/s (111ms) Shock Endurance 1,000 m/s (61ms) Weight Approximately 13 g Average sound pressure Approximately 50dB at 5cm * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n COIL RATING Must Release Coil Rated Coil Coil Resistance Must Operate Voltage Voltage Code Voltage (VDC) +/- 10% (Ohm) (V) * (V) * 009 9 180 5.5 (at 20 C) 0.7 (at 20 C) 6.9 (at 85 C) 0.9 (at 85 C) 010 10 220 6.3 (at 20 C) 0.8 (at 20 C) 7.9 (at 85 C) 1.0 (at 85 C) 012 12 320 7.3 (at 20 C) 1.0 (at 20 C) 9.2 (at 85 C) 1.3 (at 85 C) Note: All values in the table are valid for 20C and zero contact current, unless otherwise stated. * Specified operate values are valid for pulse wave volt age. 2