FTR-K1 SERIES COMPACT POWER RELAY For automotive applications 1 POLE-25A (for 12V car battery) FTR-P3 Series n FEATURES l Compact for high density packaging l High contact capacity with proven contact material. (100,000 operations, 14 V, 25 A) l Coil power savings (600mW nominal achieved with state-of-the- art magnetic design) l Ease of PCB layout (all terminals on perimeter, coil and contact terminals separated) l Optional over-voltage circuit breaking capability (0.6mm gap, contact our representative) l Packaging for auto-insertion (tube packing, 30 relays/tube) l Application examples: power window, power seat, tilt steering, sunroof, wiper, retractable antenna, etc. l Reflowable & high stand-off type available. l RoHS compliant Please see page 7 for more information n PARTNUMBER INFORMATION FTR-P3 C N 012 W1 -06 Example (a) (b) (c) (d) (e) (f) (a) Relay type FTR-P3 : FTR-P3 Series (b) Contact configuration A : 1 form A (only with -06) C : 1 form C (c) Contact gap N : 0.25mm gap P : 0.6mm gap (standard and -ML) (d) Coil rated voltage 012 : 9.....12VDC Coil rating table at page 3 (e) Contact material W1 : Silver-tin oxide indium (f) Special type None : Standard -ML : Multi-layered contacts -06 : High stand-off (Reflowable type) Actual marking does not carry the type name:FTR (-ML) (-06 E.g.: Ordering code: FTR-P3CN012W1-06 Actual marking: P3CN012W1 1FTR-K1 SERIES FTR-P3 SERIES n SPECIFICATION Item FTR-P3 Standard Multi layered con- Reflowable (without suffix) tact (-ML) (-06) Contact Data 1 form A 1 form C Configuration 1 form C (SPDT) (SPST) (SPDT) Material Silver-tin oxide indium Contact path voltage drop Max. 100mV at 1A, 12VDC Contact rating 25A at 14VDC (locked motor load) 1 Max. carrying current * 25A/1 hour (25 C, 100% rated coil voltage) Max. switching voltage 16VDC (reference) Max. switching current 35A (reference) 2 Min. switching load * 6VDC, 1A (reference) 6 Life Min. 10 x 10 6 Mechanical Min. 1 x 10 operations operations 3 Min. 100 x 10 operations, 14VDC, 25A (locked motor load) (1 Electrical operation = 1 forward and 1 reverse) Coil data -40 C to +125 C Operating ambient temperature range -40 C to +85 C (no frost) (no frost) -40 C to +85 C, -40 C to +100 C, -40 C to +125 C, Storage temperature range (no frost) 45 ~ 85% RH 45 ~ 85% RH 45 ~ 85% RH Timing Data Operate (at nominal voltage) Max. 10 ms (without bounce) Max. 5 ms (without bounce, no diode) Release (at nominal voltage) Max. 15 ms (without bounce, with diode) Insulation Resistance (initial) 100M at 500VAC Dielectric withstanding voltage (initial) 500VAC, 1 minute 2 Other 10 to 200Hz, acceleration 43m/s (4.4G), Misoperation constant acceleration Vibration resistance 2 10 to 200Hz, acceleration 43m/s (4.4G), Endurance constant acceleration Misoperation 100m/s minimum (11+/-1ms) Shock Endurance 1,000m/s minimum (6+/-1ms) Weight Approximately 5 g * 1 Need to consider the heat from PCB when max. current is more than 10A. * 2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2