FTR-K1 SERIES POWER RELAY 1 POLE - 8A Medium Load Control JS Series n FEATURES l UL class B (130C) coil wire insulation l 1 form A (SPST-NO) or 1 form C (SPDT) contact l Low profile and space saving 2 - Height: 12.5 mm - Mounting space: 290 mm l High sensitivity in small package - Operating power 110 to 140 mW - Nominal power 220 to 290 mW l High insulation in small package - Insulation distance : 8.0 mm (between coil and contacts) - Dielectric strength : 5,000 VAC - Surge strength : 10,000 V l Plastic materials - UL 94 flame class V-0 - UL CTI level class 2 l Plastic sealed type l Various contact material options l RoHS compliant. Please see page 6 for more information n PARTNUMBER INFORMATION JS - 12 M E - K T - V3 * Example (a) (b) (c) (d) (e) (f ) (g) (a) Relay type JS : JS-Series (b) Coil rated voltage 12 : 5.....60 VDC Coil rating table at page 3 (c) Contact configuration Nil : 1 form C (SPDT) M : 1 form A (SPST-NO) (d) Contact material Nil : Gold plate silver cadmium oxide D : Silver nickel E : Silver cadmium oxide F : Gold plate silver nickel N : Gold plate silver tin oxide (e) Enclosure K : Plastic sealed type (f) Construction Nil : 3.2mm T : 5.0mm (only JS-MN) (g) Gold plating Nil : 0.3 gold overlay (available with Nil, N and F contact) V3 : 3.0 gold overlay for lower current applications (available with Nil and N contact, not available for T, 5.0mm type) Note: Actual marking omits the hyphen (-) or (*) *: V3 is marked at different position on the relay E.g.: Ordering code: JS-12E-K Actual marking: JS12E-K 1FTR-K1 SERIES JS SERIES n SPECIFICATION Item Non V3 type V3 type JS - ( ) - K JS - ( ) - K JS - ( ) D/E/F/N - K JS - ( ) N - K Contact Data Configuration 1 form A (SPST-NO), 1 form C (SPDT) Construction Single Material (see part number information) 0.3 Au plated 3 Au plated Resistance (initial) Max. 100 m at 6VDC, 1A Max. 30 m at 6VDC, 1A Contact rating 8A, 250VAC / 24VDC Max. carrying current 10A Max. switching voltage 400VAC / 300VDC Max. switching power 2,000VA / 192W Min. switching load * 100mA, 5VDC 10mA, 5VDC 6 Life Mechanical Min. 20 x 10 operations 3 Min. 100 x 10 operations (AgCd) AC contact rating 3 Min. 50 x 10 operations (AgSnO ) 2 (resistive load) 3 Min. 20 x 10 operations (AgNi) Electrical 3 Min. 100 x 10 operations (AgCd) DC contact rating 3 Min. 50 x 10 operations (AgSnO ) 2 (resistive load) 3 Min. 20 x 10 operations (AgNi) Coil Data Rated power (at 20 C) 220 - 290mW Operate power (at 20 C) 110 - 140mW Operating temperature range -40 C to +85 C (no frost) Timing Data Operate (at nominal voltage) Max. 10ms (no bounce) Release (at nominal voltage) Max. 5ms (no diode, no bounce) Insulation Resistance (initial) Min. 1,000M at 500VDC Dielectric strength Open contacts 1,000VAC (50/60Hz) 1min Contacts to coil 5,000VAC (50/60Hz) 1min Surge strength Coil to contacts 10,000V / 1.2 x 50s standard wave Clearance 8 mm Creepage 8 mm EN61810-1, VDE0435 Voltage 250V Pollution degree 3 Material group III a Category C / 250V (reference voltage) (VDE 01106) Other Misoperation>1us 10 - 55 - 10 Hz double amplitude 1.65mm Vibration resistance Endurance 10 - 55 - 10 Hz double amplitude 3.3mm Min. 100m/s (11 1ms) 3 directions 36 shocks (18 Misoperation>1us with coil energizing, 18 no coil energizing) Shock Min. 1,000m/s (6 1ms) 3 directions, no coil Endurance energizing 18 shocks Weight Approximately 8.0 g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2