POWER RELAY
1 POLE - 8A Medium Load Control
JS Series
FEATURES
UL class B (130C) coil wire insulation
1 form A (SPST-NO) or 1 form C (SPDT) contact
Low profile and space saving
Height: 12.5 mm - Mounting space: 290 mm2
High sensitivity in small package
Operating power 110 to 140 mW
Nominal power 220 to 290 mW
High insulation in small package
Insulation distance : 8.0 mm (between coil and contacts)
Dielectric strength : 5,000 VAC
Surge strength : 10,000 V
Plastic materials
UL 94 flame class V-0 UL CTI level class 2
Plastic sealed type
Various contact material options
RoHS compliant (Please see page 6 for more information)
Part Numbers
[Example] JS - 12 M F - K T - V3* - RW
(a) (b) (c) (d) (e) (f) (g) (h)
(a) Relay type JS : JS series
(b) Contact rated voltage 12 : 5....60VDC (Coil rating table at page 3)
(c) Nil : 1 form C (SPDT)
Coil configuration
M : 1 form A (SPST-NO)
(d) Contact material D : Silver nickel
F : Gold flash silver nickel
N : Gold flash
(e) Enclosure K : Plastic sealed type
(f) Construction Nil : 3.2mm
T : 5.0mm (only JS-MN)
(g) Gold plating Nil : Standard (0.3micron gold flash with Nil, N and F contact)
V3 : 3.0 gold plating for lower current applications (available
with Nil and N contact, not available for T, 5.0mm type)
V1 : 1.0 gold plating for lower current applications
(avaialble with N contact, not available for T, 5,0mm type)
(h) Special type Nil : Standard
RW : Reflow capable (through hole reflow)
(not available for V1, V3)
Note: Actual marking omits the hyphen (-) or (*)
1
*: V3 is marked at different position on the relay
E.g.: Ordering code: JS-12F Actual marking: JS12F-KJS Series
Specifications
Item JS-( ) JS-( )D-K JS-( ) JS-( ) Remarks / conditions
F/N-K N-K-V1 N-K-V3
Contact Configuration 1 form A (SPST-NO), 1 form C (SPDT)
data
Construction Single
Plating 0.3 Au - 1 Au 3 Au
Plated Plated Plated
Material See partnumber information
Resistance Max.100m Max.30m 6VDC, 1A
Contact rating 8A, 250VAC / 24VDC Resistive
Max. carrying current 10A
Max. switching voltage 400VAC / 300VDC (-RW; 400VAC / 150VDC)
Max. switching power 2000VA / 192W
*1
Min. switching load 100 mA, 5VDC 10 mA, 5VDC
o
Coil Rated power (20 C) 220 - 290mW
o
Operate power (20 C) 110 - 140mW
Operating temperature range -40C ~ +85C (at rated voltage) No frost
Timing Operate Max. 10ms without bounce
data
Release Max. 5ms without bounce, no diode
Life Mechanical Min. 20 x 10 operations
Electrical AC contact rating Min. 50 x 103 operations (AgSnO2) At rated load
(resistive) Min. 20 x 10 3 operations (AgNi)
DC contact rating Min. 50 x 103 operations (AgSnO2) At rated load
Min. 20 x 10 3 operations (AgNi)
Insula- Insulation resistance Min. 1000M at 500VDC
tion
Dielectric Open contacts 1000VAC (50/60Hz), 1 minute
strength
Coil contact 5000VAC (50/60Hz), 1 minute
Surge strength Coil to contacts 10000V / 1.2 x 50s standard wave
Clearance 8mm
Creepage 8mm
EN61810-1, Voltage 250V
VDE0435
Pollution 3
Material group III a
Category C / 250V (reference voltage) (VDE 01106)
Other Vibration resis- Misoperation 10Hz ~ 55Hz ~ 10Hz single amplitude
tance 0.825mm
Endurance 10Hz ~ 55Hz ~ 10Hz single amplitude
1.65mm
Shock resis- Misoperation Min. 100m/s (11 1ms) Direction X, Y, Z, contact ON/OFF
tance total 36 times
Endurance Min. 1,000m/s (6 1ms) Direction X, Y, Z, contact OFF total
18 times
Dimensions / weight 10.0 x 29.0 x 12.5 mm / approx. 8.0g
Sealing Plastic sealed
*1
: Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load
before production since reference values may vary according to switching frequencies, environmental contions and
expected reliability levels.
2