JY-12H-K Fujitsu

FTR-K1 SERIES POWER RELAY 1 POLE - 3, 5A Medium Load Control JY Series n FEATURES l UL, CSA, VDE recognized l High sensitivity and low power consumption l High insulation l Wide operating range l DIL pitch terminals l Plastic sealed type, RTIII l Socket mounting type and socket available l Compatible with solid state relays type SJ l RoHS compliant. Please see page 7 for more information n PARTNUMBER INFORMATION JY - 12 H E - K P* Example (a) (b) (c) (d) (e) (f) (a) Relay type JY : JY Series (b) Coil rated voltage 12 : 4.5....48VDC Coil rating table at page 3 (c) Contact style Nil : 3A (Single contact) H : 5A (Single contact) W : 3A (Bifurcated contact) (d) Contact material Nil : Gold-plate silver cadmium oxide (single contact type) Nil : Gold overlay silver alloy (bifurcated contact type) E : Silver cadmium oxide (single contact type) (e) Enclosure K : Plastic sealed type, RTIII (f) Terminal type Nil : PC board mounting type P : Socket mounting type (without JY-W) Note: Actual marking omits the hyphen (-) of (*) 1FTR-K1 SERIES JY SERIES n SPECIFICATION Item 3A Type 5A Type JY - ( ) W JY - ( ) JY - ( ) E JY - ( ) H JY - ( ) HE Contact Configuration 1 form A (SPST-NO) Data Construction Bifurcated Single Gold-over- Gold-plate Silver Gold-plate lay silver silver Silver cad- Material cadmium silver cad- alloy cadmium mium oxide oxide mium oxide AgNi oxide Max. 100 Max. 30 Max. 100 Resistance (initial) (at 6 VDC, 1A) Max. 30 mOhm mOhm mOhm mOhm Contact rating 3A, 250VAC / 30VDC 5A, 250VAC / 30VDC Max. carrying current 5A Max. switching voltage 250VAC / 150 VDC Max. switching power 750VA, 90W 1,250VA, 150W Max. switching current 3A 0.1mA 10mA 100mA 10mA 100mA Min. switching load * 100 mVDC 5VDC 5VDC 5VDC 5VDC 6 Life Mechanical Min. 20 x 10 operations 3 Electrical Min. 100 x 10 operations (contact rating) Coil Data Rated power (at 20 C) 200 mW (48V type: 360 mW) Operate power (at 20 C) 100 mW (48V type: 170 mW) Operating temperature range -40 C to +90 C (no frost) (48V type: +80 C) Timing Data Operate (at nominal voltage) Max. 6 ms (without bounce) Release (at nominal voltage) Max. 3 ms (no diode) Insulation Resistance (initial) Min. 1,000MOhm at 500VDC Dielectric strength Open contacts 750VAC, 1min Contacts to coil 2,000VAC, 1min Surge strength Coil to contacts 4,000V / 1.2 x 50s standard wave Other Misoperation 10 to 55Hz double amplitude 1.5 mm Vibration resistance Endurance 10 to 55Hz double amplitude 4.5 mm Misoperation Min. 100m/s (11 1ms) Shock Endurance Min. 1,000m/s (6 1ms) Weight Approximately 5 g Sealing Plastic sealed, RTIII * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 2