FUJITSU SEMICONDUCTOR DS07-12623-5E DATA SHEET 8-bit Microcontroller CMOS 2 F MC-8FX MB95200H/210H Series MB95F204H/F204K/F203H/F203K/F202H/F202K MB95F214H/F214K/F213H/F213K/F212H/F212K DESCRIPTION MB95200H/210H is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers of this series contain a variety of peripheral resources. 2 Note: F MC is the abbreviation of FUJITSU Flexible Microcontroller. FEATURES 2 F MC-8FX CPU core Instruction set optimized for controllers Multiplication and division instructions 16-bit arithmetic operations Bit test branch instructions Bit manipulation instructions, etc. Clock (main OSC clock and sub-OSC clock are only available in MB95F204H/F204K/F203H/F203K/F202H/ F202K) Selectable main clock source Main OSC clock (up to 16.25 MHz, maximum machine clock frequency: 8.125 MHz) External clock (up to 32.5 MHz, maximum machine clock frequency: 16.25 MHz) Main internal CR clock (1/8/10 MHz 3%, maximum machine clock frequency: 10 MHz) Selectable subclock source Sub-OSC clock (32.768 kHz) External clock (32.768 kHz) Sub-internal CR clock (Typ: 100 kHz, Min: 50 kHz, Max: 200 kHz) Timer 8/16-bit composite timer Timebase timer Watch prescaler LIN-UART (MB95F204H/F204K/F203H/F203K/F202H/F202K) Full duplex double buffer Capable of clock-synchronized serial data transfer and clock-asynchronized serial data transfer (Continued) For the information for microcontroller supports, see the following web site. MB95200H/210H Series (Continued) External interrupt Interrupt by edge detection (rising edge, falling edge, and both edges can be selected) Can be used to wake up the device from different low-power consumption (standby) modes 8/10-bit A/D converter 8-bit or 10-bit resolution can be selected. Low power consumption (standby) mode Stop mode Sleep mode Watch mode Timebase timer mode I/O port (Max: 17) (MB95F204K/F203K/F202K) General-purpose I/O ports (Max): CMOS I/O: 15, N-ch open drain: 2 I/O port (Max: 16) (MB95F204H/F203H/F202H) General-purpose I/O ports (Max): CMOS I/O: 15, N-ch open drain: 1 I/O port (Max: 5) (MB95F214K/F213K/F212K) General-purpose I/O ports (Max): CMOS I/O: 3, N-ch open drain: 2 I/O port (Max: 4) (MB95F214H/F213H/F212H) General-purpose I/O ports (Max): CMOS I/O: 3, N-ch open drain: 1 On-chip debug 1-wire serial control Serial writing supported (asynchronous mode) Hardware/software watchdog timer Built-in hardware watchdog timer Low-voltage detection reset circuit Built-in low-voltage detector Clock supervisor counter Built-in clock supervisor counter function Programmable port input voltage level CMOS input level / hysteresis input level Flash memory security function Protects the contents of flash memory 2 DS07-12623-5E