FTR-K1 SERIES Non-promotional not for new designs MINIATURE RELAY 1 POLE - 1 to 2 A (For Signal Switching) MZ Series n FEATURES l Subminiature size l Standard and high sensitivity types available l UL, CSA recognized l FCC rules and regulations part 68 - Dielectric strength 1,500 V between coil and contacts l High reliability-bifurcated contacts available l DIL pitch terminals l Plastic sealed type l RoHS compliant. Please see page 7 for more information n PARTNUMBER INFORMATION MZ F - 12 W HG - K - U Example (a) (b) (c) (d) (e) (f) (g) (a) Relay type MZ : MZ-Series (b) Dielectric function Nil : Standard type F : High dielectric strength type (c) Coil rated voltage 12 : 1.5.....48 VDC Coil rating table at page 3 (d) Contact configuration Nil : 1A single D : 2A single (without MZF) W : 1A bifurcated (e) Coil type HG : Standard type (without MZ-D) (450-500mW) HS : High sensitivity type (without MZF / MZ-D) (190-270mW) (f) Enclosure Nil : Flux free type K : Plastic sealed type (g) UL, CSA standard Nil : Non UL, CSA approved U : UL, CSA approved Note: For movable and stationary contact with gold overlay type, add suffix OH. 1FTR-K1 SERIES MZ SERIES n SPECIFICATION Item Standard type High sensitivity type Single Bifurcated Single Bifurcated MZ - ( ) D MZ- ( ) HG MZ-( ) WHG MZ - ( ) HS MZ-( ) WHS Contact Data Configuration 1 form C (SPDT) Gold-overlay Material Gold overlay silver-palladium silver nickel Resistance (initial) Max. 100 m at 6 VDC, 1A 2A, 24VDC 1A, 24VDC Contact rating (resistive) 1A, 120VAC 0.5A, 120VAC Max. carrying current 2A Max. switching voltage 120VAC, 60VDC Max. switching power 120VA / 48W 60VA / 24W Max. switching current 2A 1A 0.1mA, 0.1mA, Min. switching load* 1mA, 1 VDC 1mA, 1VDC 100 mVDC 100 mVDC Approximately 0.8 pF (between open contacts, adjacent contacts) Capacitance (at 10 MHz) Approximately 7.5 pF (between coil and contacts) 6 Life Mechanical Min. 20 x 10 operations 1A, 120VAC: min. 100 x 3 3 10 ops. 0.5A, 120VAC: min. 200 x 10 operations Electrical 3 2A, 24VDC: 1A, 24VAC: min. 500 x 10 operations min. 200 x 3 10 ops. min. Coil Data Rated power (at 20 C) 450 - 500 mW 190 - 270 mW Operate power (at 20 C) 220 - 250 mW 100 - 130 mW Operating temperature range -30 C to +55 C (no frost) -30 C to +75 C Timing Data Operate (at nominal voltage) Max. 6 ms Release (at nominal voltage) Max. 3 ms Insulation Isolation (initial) Min. 100M at 500VDC Standard: 500VAC, 1min. Open contacts High Isolation: 1,000VAC, 1min. Dielectric strength Standard: 500VAC, 1min. Contacts to coil High Isolation: 1,500VAC, 1min. Surge strength Coil to contacts 1,500V / 1 x 40s standard wave Other Misoperation 10 to 55Hz double amplitude 3.28 mm Vibration resistance Endurance 10 to 55Hz double amplitude 3.28 mm Misoperation Min. 100m/s (11 1ms) Shock Endurance Min. 1,000m/s (6 1ms) Weight Approximately 3.5 g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2