Data Sheet FUJITSU Component Touch Panel Standard 4-Wire series FUJITSU Component Touch Panels Standard 4-Wire series Fujitsu Resistive Touch Panel Specification Features Superior quality standard 4-wire resistive analog touch panel Excellent specification and high quality - Anti Newton ring technology - High reliability materials Pen/finger type Transparency - 80% typical RoHS compliant Part Numbers Part Number Size Type N010-0554-T703A 3.8 Pen Finger (80%, AG, 21mm FPC) N010-0554-T241A 4.3 W Pen Finger (86%, AS, 75mm FPC) N010-0554-T015A 5.7 Pen/Finger (120mm FPC) N010-0554-T009A 5.7 Pen/Finger (50mm FPC) N010-0554-T043A 6.4 Pen/Finger (80%, AG, 61mm FPC) N010-0554-T048A 6.4 Pen/Finger (86% clear, 120mm FPC) T010-1301-T320* 7 W Pen/Finger (82%, AS, 70mm FPC) N010-0554-T504A 8.4 Pen/Finger (0.7mm glass, AS 75mm FPC) N010-0519-T742A 8.4 Pen/Finger (86%, clear, 120mm FPC) N010-0554-T511A 8.4 Pen/Finger (1.1mm glass, AS 120mm FPC) T010-1201-T930* 10.1 Pen/Finger (83%, AG, 80mm FPC) N010-0554-T347A 10.4 Pen/Finger (75mm FPC) N010-0554-T352A 10.4 Pen/Finger (82%, AS, 120mm FPC) N010-0554-T351A 10.4 Pen/Finger (86%, AS, 120mm FPC) N010-0554-T805A 12.1 Pen/Finger (75mm FPC) N010-0554-T814A 12.1 Pen/Finger (82% 120 mm FPC) N010-0554-T902A 15 Pen/Finger (61mm FPC) Notes - Unless otherwise noted, all PNs are 1.1mm Glass, Pen/Finger operation, 80% Transmissivity, Anti-Glare (AG), RoHS-Compliant. - AS = Anti-Smudge, aka AFP or Anti-Finger Print - For drawings please refer to the Documentation tab. - Full specifications are available - please contact your local Sales Representative, or use the Contact Form, to request. *: Produced by Transtouch Technology, Inc., a Fujitsu partner company. Page 1 of 3 Data Sheet FUJITSU Component Touch Panel Standard 4-Wire series Controller Boards Part Number Type NC01850-B070RS 4-wire, RS232 NC01850-B010RS 4-wire, USB FID-1850-120 4-wire, USB, dual touch Interface Controller Chips Part Number Type NC41120-0036 4-wire, RS232 NC41120-0051 4-wire, USB FID-1860-005 4-wire, USB, dual touch Dimension example (10.4 shown) 228.20 4.00 (8.00) 216.20: Transparent area 214.80: Boundary line of the top enclosure (8.70) 4.70 9.50 Anti-input area 213.20 5.50 Anti-input area 212.20: Guaranteed active area 6.00 (10.00) 112.10 Unit: mm Top 26.50 10.20 Right Left Bottom 75.001.0 Detailed specifications 1.0 Application This specification applies to the standard series Resistive Touch Panel (Pen/Finger type) 2.0 Additional application Complete specification document is available upon request. 3.0 Description and block diagram This panel in combination with a control IC chip or control board is used to transfer the co-ordinate data to the host system. Please see block diagram on page 1. Page 2 of 3