FTR-K1 SERIES
POWER RELAY
1 POLE - 5A Slim Type
NY Series
n FEATURES
l Slim type with 5 mm thickness
- Suited for high density mounting
l Low power consumption and high sensitivity
- Nominal coil power: 120 mW
- Operating power: 54 mW
l UL and CSA recognized
l High insulation
- Surge voltage: 5,080V
- Dielectric strength: 3,000VAC (coil and contacts)
l SIL pitch terminals
l Plastic sealed type, RTIII
l Compatible with solid state I/O module type SN in size
and pin (terminal) arrangement
l Environmentally friendly cadmium free contact type
l RoHS compliant.
Please see page 6 for more information
n PARTNUMBER INFORMATION
NY P - 12 W - K - IE
[Example] (a) (b) (*) (c) (d) (e) (*) (f)
(a) Relay type NY : NY-Series
(b) Mounting type Nil : PCB board mounting type
P : Socket mounting type
(c) Coil rated voltage 12 : 4.5.....24 VDC
Coil rating table at page 3
(d) Contact design W : Bifurcated contact
(e) Enclosure K : Plastic sealed type, RTIII
(f) Insulation IE : Conform to IEC standard
Note: Actual marking omits the hyphen (-) and IE of (*)
1FTR-K1 SERIES
NY SERIES
n SPECIFICATION
Item NY Remarks / Conditions
Contact Configuration 1 form A (SPST-NO)
Data
Construction Bifurcated
Gold overlay silver alloy (AgNi +
Material
Au)
Resistance (initial) Max. 30 m at 6 VDC, 1 A
Contact rating 5A, 250VAC / 30VDC
Max. carrying current 5A
Max. switching voltage 270VAC / 125 VDC
Max. switching power 750VA / 90W
Max. switching current 5A
Min. switching load * 1 mA, 5 VDC
6
Life Mechanical Min. 20 x 10 operations
3
Min. 100 x 10 operations
(at 3A, 250VAC, 30VDC resistive)
Electrical
3
Min. 50 x 10 operations
(at 5A, 250VAC, 30VDC resistive)
Coil Rated power (at 20 C) 120 mW
Data
Operate power (at 20 C) 54 mW
Operating temperature range -40 C to +90 C (no frost)
Timing
Operate (at nominal voltage) Max. 10 ms (without bounce)
Data
Release (at nominal voltage) Max. 5 ms (without bounce)
Insula- Resistance (initial) Min. 1,000M at 500VDC
tion
Dielectric strength Open contacts 750VAC, 1min
Contacts to coil 3,000VAC, 1min
5,080V / 1.2 x 50s standard
Surge strength Coil to contacts
wave
Clearance Min. 3mm
Creepage Min. 3mm
Other 10 to 55 to 10Hz single ampli-
Misoperation Coil ON/OFF, 3 axes, total 6 cycles
tude 0.75mm
Vibration resistance
10 to 55 to 10Hz single ampli-
Endurance Coil OFF, 3 axes, total 6 hours
tude 0.25mm
Coil ON/OFF, 3 axes, total 36
Misoperation Min. 100m/s (11 1ms)
operations
Shock
Coil OFF, 3 axes, total 18 opera-
Endurance Min. 1,000m/s (6 1ms)
tions
Weight Approximately 3.5 g
Sealing Plastic sealed, RTIII
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2