FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Type NY Series n FEATURES l Slim type with 5 mm thickness - Suited for high density mounting l Low power consumption and high sensitivity - Nominal coil power: 120 mW - Operating power: 54 mW l UL and CSA recognized l Conforms to IEC61010, 61131 l High insulation - Surge voltage: 5,080V - Dielectric strength: 3,000VAC (coil and contacts) l SIL pitch terminals l Plastic sealed type, RTIII l Compatible with solid state I/O module type SN in size and pin (terminal) arrangement l Environmentally friendly cadmium free contact type l RoHS compliant. Please see page 6 for more information n PARTNUMBER INFORMATION NY P - 12 W - K - IE Example (a) (b) (*) (c) (d) (e) (*) (f ) (a) Relay type NY : NY-Series (b) Mounting type Nil : PCB board mounting type P : Socket mounting type (c) Coil rated voltage 12 : 4.5.....24 VDC Coil rating table at page 3 (d) Contact design W : Bifurcated contact (e) Enclosure K : Plastic sealed type, RTIII (f) Insulation IE : Complies with IEC standard, IEC61010, 61131 Note: Actual marking omits the hyphen (-) and IE of (*) 1FTR-K1 SERIES NY SERIES n SPECIFICATION Item NY Contact Data Configuration 1 form A (SPST-NO) Construction Bifurcated Material Gold overlay silver alloy (AgNi + Au) Resistance (initial) Max. 30 m at 6 VDC, 1 A Contact rating 5A, 250VAC / 30VDC Max. carrying current 5A Max. switching voltage 270VAC / 150 VDC Max. switching power 750VA / 90W Max. switching current 5A Min. switching load * 1 mA, 5 VDC 6 Life Mechanical Min. 20 x 10 operations 3 Min. 100 x 10 operations (at 3A, 250VAC, 30VDC resistive) Electrical 3 Min. 50 x 10 operations (at 5A, 250VAC, 30VDC resistive) Coil Data Rated power (at 20 C) 120 mW Operate power (at 20 C) 54 mW Operating temperature range -40 C to +90 C (no frost) Timing Data Operate (at nominal voltage) Max. 10 ms (without bounce) Release (at nominal voltage) Max. 5 ms (no diode) Insulation Resistance (initial) Min. 1,000M at 500VDC Dielectric strength Open contacts 750VAC, 1min Contacts to coil 3,000VAC, 1min Surge strength Coil to contacts 5,080V / 1.2 x 50s standard wave Other Misoperation 10 to 55Hz double amplitude 1.5 mm Vibration resistance Endurance 10 to 55Hz double amplitude 5 mm Misoperation Min. 100m/s (11 1ms) Shock Endurance Min. 1,000m/s (6 1ms) Weight Approximately 3.5 g Sealing Plastic sealed, RTIII * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2