FTR-K1 SERIES POWER RELAY 1 POLE - 5A Medium Load Control VE Series n FEATURES l UL, CSA, VDE, CQC recognized l 1 form A (SPST-NO) or 1 form C (SPDT) contact l Low cost, miniature relay with big performance in smal package - Higher surge voltage type is available (6,000 V) - 2,000 VAC between coil and contacts l Slim typemeets high density mounting requirements l Wide operating range l Easy circuit design with completely separated terminal arrangement (coil and contact terminals) l Plastic sealed type, RTIII l Creepage min. 3.2 mm l RoHS compliant. Please see page 6 for more information n PARTNUMBER INFORMATION VE - 12 H M S E - K - HV - VD Example (a) (*) (b) (c) (d) (e) (f) (g) (h) (i) (a) Relay type VE : VE Series (b) Coil rated voltage 12 : 5....48VDC Coil rating table at page 3 (c) Contact rating H : Heavy duty type (d) Contact configuration Nil : 1 form C (SPDT) M : 1 form A (SPST-NO) (e) Coil type Nil : Standard type (360mW) S : High sensitive type (250mW) (f) Contact material Nil : Gold overlay silver-nickel (N.C.: 3A, N.O.: 5A) E : Silver-nickel (N.C.: 3A, N.O.: 5A) 5 : Silver cadmium oxide (N.C.: 5A, N.O.: 5A) (g) Enclosure K : Plastic sealed type, RTIII (h) Surge strength Nil : Standard type (4,000V) HV : High dielectric strength type (6,000V) (i) Approvals VD : UL, CSA, VDE approved type Note: Actual marking omits the hyphen (-) of (*) 1FTR-K1 SERIES VE SERIES n SPECIFICATION VE-( ) HM(S)E-K VE-( ) H(S)E-K VE-( ) HM(S)5-K VE-( ) H(S)5-K VE-( ) HM(S)-K VE-( ) H(S)-K Contact Data 1 form A 1 form C 1 form A Configuration 1 form C (SPDT) (SPST-NO) (SPDT) (SPST-NO) Construction Single Gold overlay silver nickel, silver nickel, silver-cadmium oxide alloy Material (AgNi + Au, AgNi, AgCd) Max. 70mOhm (VE-HM, H) Resistance (initial) (at 6 VDC, 1A) Max. 200mOhm Max. 100mOhm (VE-HME, HE) 5A, 250VAC (N.O.) Contact rating (resistive) 5A, 250VAC 5A, 250VAC 3A, 250VAC (N.C.) Max. carrying current 7A Max. switching voltage 250VAC, 150 VDC 1,250VA (N.O.) Max. switching power 1,250VA 1,250VA 750VA (N.C.) 5A (N.O.) Max. switching current 5A 5A 3A (N.C.) Min. switching load * 10 mA, 5 VDC (VE-HM, H), 100 mA 5 VDC (VE-HME, HE, HM5, H5) 6 Life Mechanical Min. 10 x 10 operations 3 3 Min. 100 x 10 operations Min. 50 x 10 operations Electrical (at rating) Standard type High sensitive type Coil Data Rated power (at 20 C) 360 mW standard type, 250 mW high sensitive type Operate power (at 20 C) 177 mW standard type, 130 mW high sensitive type Standard: -40 C to +85 C Operating temperature range High sensitivity: -40 C to +90 C (no frost) Timing Data Operate (at nominal voltage) Max. 10 ms (without bounce) Release (at nominal voltage) Max. 5 ms (no diode) Insulation Resistance (initial) Min. 1,000MOhm at 500VDC Dielectric strength Open contacts 1,000VAC 1min. 750VAC 1min. 1,000VAC 1min. 750VAC 1min. Contacts to coil 2,000VAC, 1min Surge strength Coil to contacts Standard: 4,000V / High sensitive: 6,000V, 1.2 x 50s standard wave Other Misoperation 10 to 55Hz double amplitude 3.3 mm Vibration resistance Endurance 10 to 55Hz double amplitude 3.3 mm Misoperation Min. 100m/s (11 1ms) Shock Endurance Min. 500m/s (6 1ms) Weight Approximately 8 g Sealing Plastic sealed RTIII * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 2