FFC3B05-16-T GCT

5 1 2 3 4 6 7 8 Global Connector Technology Ltd. - FFC3B05 : FPC 1.0mm Pitch Side Entry, Bottom Contact, SMT, Height=2.5mm, ZIF, Slide Type A A B B C C Pin No. Dim.A Dim.B Dim.C Dim.D 4 9.10 3.00 11.00 5.10 * 5 10.10 4.00 12.00 6.10 * 6 11.10 5.00 13.00 7.10 * 7 12.10 6.00 14.00 8.10 * 8 13.10 7.00 15.00 9.10 * D D 9 14.10 8.00 16.00 10.10 * 10 15.10 9.00 17.00 11.10 * 11 16.10 10.00 18.00 12.10 * 12 17.10 11.00 19.00 13.10 * 13 18.10 12.00 20.00 14.10 * Specification : 14 19.10 13.00 21.00 15.10 * 15 20.10 14.00 22.00 16.10 * Material : E E 16 21.10 15.00 23.00 17.10 * Housing Material: High-Temp Plastic LCP (UL 94V-0), White 17 22.10 16.00 24.00 18.10 * Actuator: LCP (UL 94V-0), Black 18 23.10 17.00 25.00 19.10 * Contact: Phosphor Bronze 19 24.10 18.00 26.00 20.10 * Finish (a) Contact Plating: see ordering grid 20 25.10 19.00 27.00 21.10 * (b) Underplating: Nickel-plated all over 21 26.10 20.00 28.00 22.10 Fitting Nail: Brass, tin plated Ordering Grid 22 27.10 21.00 29.00 23.10 F F FFC3B05 XX X 23 28.10 22.00 30.00 24.10 Mechanical 24 29.10 23.00 31.00 25.10 Durability: 20 Cycles * 25 30.10 24.00 32.00 26.10 No. of Contacts Contact Plating 26 31.10 25.00 33.00 27.10 Electrical : 04 - 30 27 32.10 26.00 34.00 28.10 Voltage Rating (Max.): 50V AC/DC 50V AC/DC T=Tin Plating over all (Standard) - reel qty=1500pcs (see dimension table) 28 33.10 27.00 35.00 29.10 G=Gold Flash over all - reel qty=1500pcs, MOQ 4 reels Current Rating (Max.): 0.4A AC/DC 0.4A AC/DC Dielectric Strength: 500V AC for 1 minute 29 34.10 28.00 36.00 30.10 between adjacent terminal, no breakdown 30 35.10 29.00 37.00 31.10 * G G 500V AC1 * = Tooled Parts Insulation Resistance: 50 M Min. 250V DC Please contact GCT for non-tooled parts for 1 minute between adjacent terminal Non-tooled MOQ 10k pcs : 50M , 250V DC 1 Contact Resistance: 40 m Max. 40 Tolerances Part Number:- Date:- (Except as noted) Operating Temperature: -25C to +85C -25to +85 Dimensions in mm FFC3B05 24 MAY 10 Solder Profile: Peak Temp 260C (+0/-5C) Maximum (5 seconds) X.X 0.30 X.X 2 H Description:- H X.XX 0.15 X.XX 1 By PKN FPC 1.0mm PITCH SIDE ENTRY, BOTTOM CONTACT, X.XXX 0.10 X.XXX 0.5 DRAWING SMT, HEIGHT=2.5mm, ZIF, SLIDE TYPE www.globalconnectortechnology.com DETAIL RELEASE Halogen THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE Scale Revision Material Drawn by Sheet No. REV A Free C COPIED OR DISCLOSED WITHOUT WRITTEN CONSENT DATE 24/05/10 Third Angle Projection NTS A See Note PKN E & OE 1/2 1 23 4 5 67 81 2 3 4 5 6 7 8 Global Connector Technology Ltd. - FFC3B05 : FPC 1.0mm Pitch Side Entry, Bottom Contact, SMT, Height=2.5mm, ZIF, Slide Type A A PIN NO. DIM.A DIM.B DIM.C DIM.D 4P 11 11.5 NOTES: 5P 12 12.5 1.Number of Connectors: B B 6P 13 13.5 24 24.5 1500 Pcs/Reel 7P 14 14.5 2.Material 8P 15 15.5 9P 16 16.5 Carrier Tape:PET,PE,PEF 10P 17 17.5 32 32.5 Reel:PS C C 11P 18 18.5 3.Lead Tape Length: 12P 19 19.5 13P 20 20.5 14P 21 21.5 15P 22 22.5 D D 16P 23 23.5 17P 24 24.5 44 44.5 18P 25 25.5 19P 26 26.5 20P 27 27.5 E E 21P 28 28.5 4.Peeling off force of top tape 22P 29 29.5 23P 30 30.5 0.1N~0.7N(10.2gf~71.4gf) 24P 31 31.5 (Peeling direction as shown in 25P 32 32.5 follwing fig) F F 26P 33 33.5 56 56.5 27P 34 34.5 28P 35 35.5 29P 36 36.5 30P 37 37.5 G G Tolerances Part Number:- Date:- (Except as noted) Dimensions in mm FFC3B05 24 MAY 10 X.X 0.30 X.X 2 H Description:- H X.XX 0.20 X.XX 1 By PKN FPC 1.0mm PITCH SIDE ENTRY, BOTTOM CONTACT, X.XXX 0.10 X.XXX 0.5 DRAWING SMT, HEIGHT=2.5mm, ZIF, SLIDE TYPE www.globalconnectortechnology.com DETAIL RELEASE Halogen THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE Scale Revision Material Drawn by Sheet No. REV A Free C COPIED OR DISCLOSED WITHOUT WRITTEN CONSENT DATE 24/05/10 Third Angle Projection NTS A See Note PKN E & OE 2/2 1 23 4 5 67 8