C-3700-18 General Devices

C-3700 Two Section Slide *Ultra-Thin Solid Bearing Slide A B C C D E F G G Catalog Load (MIN) (MAX) (MIN) (MAX) Number Capacity TO ORDER, SPECIFY C-3700-12 12.00 10.13 6.22 7.45 NONE NONE 2 0.00 1.23 85 LBS. C-3700-14 14.00 12.13 7.72 8.95 NONE NONE 2 0.00 1.23 80 LBS. C-3700 - - C-3700-16 16.00 14.13 9.22 10.45 NONE 1 3 0.00 1.23 80 LBS. C-3700-18 18.00 16.13 10.72 11.95 NONE 1 3 0.00 1.23 75 LBS. C-3700-20 20.00 18.13 12.22 13.45 NONE 2 4 0.00 1.23 75 LBS. AR - Automatic Length C-3700-22 22.00 20.13 13.22 14.45 NONE 2 4 0.00 1.23 70 LBS. Release if desired AND/OR C-3700-24 24.00 22.13 14.72 15.95 NONE 2 4 0.00 1.23 70 LBS. RC - See chart below C-3700-26 26.00 24.13 16.22 17.45 3.625 3 6 0.00 1.23 65 LBS. C-3700-28 28.00 26.13 17.22 18.45 3.625 3 6 0.00 1.23 65 LBS. C-3700-30 30.00 28.13 18.72 19.45 3.625 3 6 0.00 1.23 60 LBS. Notes TM 1. Finish: All standard slides are coated with Poxylube dry film lubricant. 2. All standard slides are designed to lock-out in the extended position and are available with an optional automatic release if lock-out is not desirable. 3. Standard hardware packages include all the hardware necessary to mount your Chassis Trak slides: Rear mounting bracket (B-217 or B-161) included Bar Nuts (CA8056-06-0017 or CA8056-06-0014) 6-32 screws and keps nuts to mount chassis section 10-32 screws and keps nuts to mount slide in rack 4. All sliding members of the standard slide are made from cold rolled steel. 5. All Chassis Trak solid bearing slides are supplied with a quick disconnect feature. 6. Optional mounting patterns, slide lengths and extensions are available. 7. For optional mounting brackets see page 34. 29 www.generaldevices.com Phone: 317-897-7000 Email: sales generaldevices.com ISO 9001:2000 Registered Optional Mounting Brackets Matrix For Solid Bearing Slides & Appropriate Rear Mounting Brackets with Range of Extension B-217* B-217-1.5 B-217-2 B-217-2.5 B-217-3 B-217-3.5 B-217-4 B-308 B-793 C-300-D 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 0 to 6.00 C-300-S 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 0 to 6.00 C-874 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 C-3700 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 B-161* B-161-1.5 B-161-2 B-161-2.5 B-161-3 B-161-3.5 B-161-4 B-309 B-389 C-300-D-RC 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 C-300-S-RC 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 C-300-S-RC-3S 0 to 6.00 C-874-RC 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 C-3700-RC 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 Note brackets are made from 16 gauge C.R.S. Standard finish: clear zinc commercial plating *Supplied with standard slides CATALOG NUMBER A B-217 or B-161 1.25 B-217-1.5 or B-161-1.5 1.50 B-217-2 or B-161-2 2.00 B-217-2.5 or B-161-2.5 2.50 B-217-3 or B-161-3 3.00 B-217-3.5 or B-161-3.5 3.50 B-217-4 or B-161-4 4.00 B-217 B-161 B-793 B-308 B-389 B-309 34 www.generaldevices.com Phone: 317-897-7000 Email: sales generaldevices.com ISO 9001:2000 Registered