CTHRS-124 General Devices

CTHRS Slide A B B C D E E F Catalog Load TO ORDER, SPECIFY (min) (max) (min) (max) Number Capacity CTHRS-114 14.00 13.75 15.63 13.00 12.13 0.00 1.88 3 275 LBS. - CTHRS - CTHRS-116 16.00 15.75 19.63 15.00 12.13 0.00 3.88 3 275 LBS. CTHRS-118 18.00 21.63 23.63 17.00 16.00 0.00 2.00 4 275 LBS. Stationary Section CTHRS-120 20.00 23.63 27.63 19.00 16.00 0.00 4.00 4 275 LBS. AR - Automatic Length 1 - Cabinet Mount CTHRS-122 22.00 23.63 29.63 21.00 16.00 0.00 6.00 4 275 LBS. Release if desired 2 - Strap Mount CTHRS-124 24.00 24.25 31.63 23.00 16.00 0.63 8.00 4 275 LBS. 4 - Closed Slot For information on Strap Mount option see page 28. Notes 1. Right hand shown, left hand opposite. TM 2. Finish: All standard slides are coated with Poxylube dry film lubricant. 3. All standard slides are designed to lock-out in the extended position and are available with an optional automatic release if lock-out is not desirable. 4. Standard hardware packages include all the hardware necessary to mount your Chassis Trak slides: Rear mounting bracket (B-131) included Bar nuts (CA8056-06-0020) 10-32 screws and keps nuts 5. All sliding members of the standard slide are made from cold rolled steel. 6. All Chassis Trak solid bearing slides are supplied with a quick disconnect feature. 7. Optional mounting patterns, slide lengths and extensions are available. 8. Pickup tab available for units without a front panel. 9. For optional mounting brackets see page 35. 25 www.generaldevices.com Phone: 317-897-7000 Email: sales generaldevices.com ISO 9001:2000 Registered Strap Mounting Option CTRS Strap Mount A B 12.00 10.50 14.00 12.50 16.00 14.50 Notes 18.00 16.50 1. To order, specify CTRS - 2 XX see pages 20-21 for more information. 20.00 18.50 2. Strap mount slides are not designed to accommodate the standard EIA hole pattern. 22.00 20.50 3. All slides requires a .31 clearance behind the spring and button assembly for proper operation. 24.00 22.50 CTHS Strap Mount A B 12.00 10.50 14.00 12.50 16.00 14.50 18.00 16.50 Notes 20.00 18.50 1. To order, specify CTHS - 2 XX see pages 22-23 for more information. 22.00 20.50 2. Strap mount slides are not designed to accommodate the standard EIA hole pattern. 24.00 22.50 3. All slides requires a .31 clearance behind the spring and button assembly for proper operation. CTHRS Strap Mount A B 12.00 10.50 14.00 12.50 16.00 14.50 18.00 16.50 Notes 20.00 18.50 1. To order, specify CTHRS - 2 XX see pages 24-25 for more information. 22.00 20.50 2. Strap mount slides are not designed to accommodate the standard EIA hole pattern. 24.00 22.50 3. All slides requires a .31 clearance behind the spring and button assembly for proper operation. 28 www.generaldevices.com Phone: 317-897-7000 Email: sales generaldevices.com ISO 9001:2000 Registered