GENERAL PURPOSE CHIP RESISTORS
RC0805
5%, 1%, 0.5%, 0.1%
RoHS Compliant & Halogen Free
www.yageo.com
Product specification - July 26, 2016 V0
1
Chip Resistor Surface Mount RC SERIES 0805
5
SCOPE
This specification describes RC0805 series chip resistors with lead-free terminal made by thick film process.
ORDERING INFORMATION
Part number is identified by the series, size, tolerance, packing style, temperature coefficient, taping reel,
resistance value.
RC0805 X R XX XXX L
MARKING
(1) (2) (3) (4) (5) (6) RC0805
(1) TOLERANCE
B = 0.1%
5% E-24 series: 3 digits
103
F = 0.5%
First two digits for significant figure and 3rd
F = 1%
digit for number of zeros.
Fig.1 Value = 10k
J = 5% ( for jumper ordering use
code of J)
(2) PACKAGING TYPE
R = Paper taping reel
(3) TEMPERATURE COEFFICIENT
OF RESISTANCE
Both 1% E-24 and E-96 series: 4 digits
= base on spec.
1002
First three digits for significant figure and 4th
(4) TAPING REEL
Fig.2 Value = 10K digit for number of zeros.
07 = 7 inch dia. Reel
(5) RESISTANCE VALUE
1 to 100M
CONSTRUCTION
The resistors are constructed out of a high-grade ceramic body. Internal metal
(6) Default Code electrodes are added at each end and connected by a resistive material. The
composition of the resistive material is adjusted to give the approximate
Letter L is system default
required resistance and laser cutting of this resistive layer that achieves
code for order only (NOTE)
tolerance trims the value. The resistive layer is covered with a protective coat
and printed with the resistance value. Finally, the two external terminations
are added. See fig.3
Note
1. All our RSMD products meet RoHS compliant and Halogen Free.LF of the internal 2D reel label mentionsLead Free Proces.
2. On customized label,LF or specific symbol can be printed
www.yageo.com