GBL06 thru GBL10 V = 600 V -1000 V RRM Single Phase Glass Passivated Silicon I = 4 A O Bridge Rectifier Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 This series is UL listed under the Recognized Glass passivated chip junction GBL Package High case dielectric strength Typical I less than 0,1 A R High surge current capability Ideal for printed circuit boards Not ESD Sensitive Mechanical Data Case: Molded plastic body over passivated junctions Terminals: Plated leads, solderable per MIL-STD-750 Method 2026. Weight: 0.071 oz, 2.0 g Maximum ratings at Tc = 25 C, unless otherwise specified Parameter Symbol Conditions GBL06 GBL08 GBL10 Unit Repetitive peak reverse voltage V 600 800 1000 V RRM V 700 RMS reverse voltage 420 560 V RMS DC blocking voltage V 600 800 1000 V DC T -55 to 150 Operating temperature -55 to 150 -55 to 150 C j T Storage temperature -55 to 150 -55 to 150 -55 to 150 C stg Electrical characteristics at Tc = 25 C, unless otherwise specified Single phase, half sine wave, 60 Hz, resistive or inductive load. For capacitive load derate current by 20%. Parameter Symbol Conditions GBL06 GBL08 GBL10 Unit T = 50 C (Note 1) 4.0 4.0 4.0 c Maximum average forward rectified I A O current T = 40 C (Note 2) 3.0 c 3.0 3.0 t = 8.3 ms, half sine Peak forward surge current I 135 135 135 A FSM p Maximum instantaneous forward V I = 4 A 1.1 V 1.1 1.1 F F voltage drop per leg T = 25 C 5 5 5 Maximum DC reverse current at a I A R rated DC blocking voltage per leg T = 125 C 500 500 500 a 2 2 I t A sec Rating for fusing t < 8.3 ms 75 75 75 Typical junction capacitance per leg C 40 40 40 pF j (Note 3) R (Note 1) 22 22 22 JA Typical thermal resistance per leg C/W R (Note 2) 3.5 3.5 3.5 JL 1 - Unit mounted on 3.0 x 3.0 x 0.11 (75 mm x 75 mm x 3 mm) Al plate 2 - Unit mounted on P.C.B. At 0.375 (9.5 mm) lead length and 0.5 x 0.5 (12 mm x 12 mm) 3 - Measured at 1.0 MHz and applied reverse bias of 4.0 V 1 Oct. 2018 GBL06 thru GBL10 2 Oct. 2018