2A5DT5 GIC

Electronic Timer - Series Micon 225 Signal Based Multi - Function Multi-function with Signal Start and Supply Start. 16 Timing Functions selected by DIP switch. Two independent relay outputs with either both relays timed or one timed and one instantaneous. Wide Input Signal & Supply range - 24-240V AC/DC. Wide Timing Range - 0.1 s to 120 days. High timing Accuracy. LED indicators for Power Supply & Relay Status. 22.5mm DIN Mount Housing. Ordering Information Cat. No. Description 2A8DT6 24-240 VAC / DC, Signal Based Multi - Function, 1 C/O + 1 C/O 26 Electronic Timer - Series Micon 225 Signal Based Multi - Function Cat. No. 2A8DT6 Parameters Timer Description Multi-function with Signal Start and Supply Start Supply Voltage ( ) 24-240 VAC / DC Supply Variation - 20% to +10%(of ) Frequency 50/60 Hz Power Consumption (Max.) 3 VA Initiate Time 100 ms (Max.) Reset Time 200 ms (Max.) Signal Low Range (B1L-A2) 24-60V AC/DC High Range (B1H-A2) Voltage 85-265V AC, 100-265V DC For AC Signals: 50 ms Max. Signal Sensing Time For DC Signals: 20 ms Max. Signal stabilization Delay 100 ms (Applicable at Power ON Only) Setting Accuracy 5% of Full scale Repeat Accuracy 1% Relay Output 1 C/O (Delayed) & 1 C/O (Configurable as either Delayed or Instant) Contact Rating 5A 240 VAC / 28 VDC (Resistive) Contact Material AgNi Output 5 Electrical Life 1x10 7 Mechanical Life 1x10 Set Time (Ts) 0.1 seconds to 120 Days Refer page no. 21 & 22 Functions LED Indication on front panel Green LED ON: Power ON, Amber LED ON :Relay ON for Delayed contact Mounting Base / DIN Rail Max. Operating Altitude 2000 m Housing Flame retardant (UL 94-V0) -10C to +60C Operating Temperature Storage Temperature -20C to +70C Humidity (Non Condensing) 95% (Rh) LED Indication Green LED Power ON, Red LED Relay ON Enclosure Flame Retardant UL94-V0 Dimension (W x H x D) (in mm) 22.5 X 83 X 100.5 Weight (unpacked) 130 g Pollution Degree II Certification RoHS Compliant Degree of Protection IP 20 for Terminals, IP 40 for Enclosure EMI / EMC Harmonic Current Emissions IEC 61000-3-2 ESD IEC 61000-4-2 Radiated Susceptibility IEC 61000-4-3 Electrical Fast Transients IEC 61000-4-4 Surges IEC 61000-4-5 Conducted Susceptibility IEC 61000-4-6 Voltage Dips & Interruptions (AC) IEC 61000-4-11 Conducted Emission CISPR 14-1 Radiated Emission CISPR 14-1 Safety: Test Voltage between I/P and O/P IEC 60947-5-1 Test Voltage between all terminals IEC 60947-5-1 & enclosure Impulse Voltage between I/P and O/P IEC 60947-5-1 Single Fault IEC 61010-1 Insulation Resistance UL 508 Leakage Current UL 508 Product Reference Standard IEC 61812-1 Environmental Cold Heat IEC 60068-2-1 Dry Heat IEC 60068-2-2 Vibration IEC 60068-2-6 Repetitive Shock IEC 60068-2-27 Non-Repetitive Shock IEC 60068-2-27 27