S:\part\s1\12\120-123.prt
120-123
REVISIONS
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
SYM.
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED DESCRIPTION DATE APPROVED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION A RELEASED 10/12/01 R L
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
B REVISED PER DCN 18537 11/08/01
E.L
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
C REVISED PER DCN 18629 12/04/01 E.L
D REVISED PER DCN 19014 03/11/02 E.L
TABLE I
E REVISED PER DCN 19176 04/09/02 E.L
DASH FRACTIONAL A B MIN. BEND WEIGHT NOM. CONVOLUTION CONVOLUTIONS WALL THICKNESS
F REVISED PER DCN 19204 04/17/02 E.L
SIZE REF
NO NOM NOM RADIUS LBS/FT DEPTH MIN. PER INCH 1 NOM.+0-.002
G REVISED PER DCN 23263 12/17/04 DWN
06 3/16 .189 .311 9/16 .006 .054 9 .008
H REVISED PER DCN 51069 06/09/14 M.P.
.424 5/8 .008 .054 9 .008
09 9/32 .284
.443 11/16 .009 .054 9 .008
10 5/16 .307
12 3/8 .370 .521 3/4 .011 .054 9 .008
.584 13/16 .013 .063 9 .008
14 7/16 .433
16 1/2 .650 7/8 .013 .063 9 .008
.492
20 5/8 .622 .780 1 .015 .063 9 .008
.938 1 1/4 .021 .079 9 .009 2
24 3/4 .756
28 7/8 1.095 1 1/2 .028 .079 9 .009
.866 LENGTH
32 1 .993 1.226 1 3/4 .035 .079 8 .010
(AS SPECIFIED IN P.O.)
PART NUMBER DEVELOPMENT
EXAMPLE: 120 123 16 D
- -
A
B
PRODUCT SERIES
BASIC NO
DASH NO, TABLE I
D = DRAIN HOLES
(OMIT FOR NONE)
60
MIN. BEND
RADIUS
3 1
2
2
.080
5
1
3
1.102/.984
(28.0/25.0)
NOTES:
1/2 CPI
1. PACKAGES AND SPOOLS IDENTIFIED WITH MANUFACTURER'S NAME AND P/N.
2 . UNLESS OTHERWISE SPECIFIED, CONDUIT WILL BE SHIPPED PER STANDARD PACKAGE
MIN. LENGTH SUPPLIED WILL BE 10 FEET WITH A MAX. OF 4 LENGTHS PER PACKAGE.
3. CONSULT FACTORY FOR SIZE NOT SHOWN.
C
DRAWN R L 10/12/01
CAD 1994
UNLESS OTHERWISE SPECIFIED
CHECK R.PAINTER 10/12/01
4. OPERATING TEMPERATURE - (-60C/250C).
DIMENSIONS ARE IN INCHES 10/12/01 1211 AIR WAY - GLENDALE - CALIFORNIA 91201
ENGR D.NORTHON
5 WHEN SPECIFIED, CONTINUOUS DRAIN HOLES SHALL BE CUT IN PAIRS ON OPPOSITE TOLERANCES:
SIDES OF THE TUBING, AND ON THE CRESTS OF THE CONVOLUTIONS. EACH
+
1/16
FRACTIONS
SUCCESSIVE PAIR OF HOLES SHALL BE ROTATED 60 IN THE SAME DIRECTION ALONG -
APPROVED
TUBING, CONVOLUTED,HELICAL
+
.XX .03
THE HELIX (RIGHT HAND). -
DECIMALS
+
.XXX .015
-
ANGLES +
2
6. MATERIAL/FINISH: -
APPROVED
CODE IDENT. NO. SIZE
REV.
CONVOLUTED TUBING - PEEK/BLACK.
RELEASE DATE
06324
DO NOT SCALE THIS DRAWING ORIGINAL 120-123
H
RELEASE DATE C
B/F P/C 12 NON REPARABLE COMMERCIAL ITEM SCALE N/A WEIGHT N/A SHEET 1 OF 1
01-5227
1 of 1
SET
3
SET
2
SET
1X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Non-Heat Shrink Tubing and Sleeves category:
Click to view products by Glenair manufacturer:
Other Similar products are found below :
601203-000 CTA-0053 8429-9 8445-7.5 8450 120-116-1-1-09BE 120-116-1-1-09BF 120-116-1-1-09BP 120-116-1-1-12BE 120-116-1-1-
12BP 120-123-06 120-123-10 120-125-12BL 120-125-12R 120-125-20R 120-126-09 120-126-09BL 120-126-12 120-126-12BL 120-126-
52 120-126-52BL 120-104-12 120-105-1-1-06BE 120-105-1-1-06CE 120-108-10B 120-116-1-1-06BP 120-116-1-1-10BP 120-116-1-1-
12BF 120-123-12 120-125-09 120-125-12 120-125-12Y 120-125-52BL 120-S002-12 HC1B-7008-0375-0 120-S001-09 120-S002-09 121-
101-1-1-56BFC 121-101-1-1-64BFC 121-103-1-1-12BFTTH RAY-90-3.0(100) 20675-2 8S42-100FR-CS8184 SAS-115-1-1048-1X SAS-
160-1-1048-1X RAY-103-10.0(100) RAY-103-4.0(100) 4627-S 3-1991136-0 561-SL1000PP