series 28 HiPer-D Standard and High-Density Connectors 280-027S straight PC tail socket connectors with low profile mounting flange Low profile HiPer-D straight PC tail socket connectors feature non-removable size 20 or 22 contacts. Intermateable with standard M24308-type D-Subminiature connectors, the HiPer-D features a rugged machined shell, waterproof sealing and optional ground springs for improved resistance to electromagnetic interference. Threaded holes on the rear of the connector allow attachment to circuit board. Contacts are potted with epoxy. Aluminum shell. Glass-reinforced thermoset epoxy insulators. 1000 VAC, 5 Amps ( 22) or 7.5 Amps ( 20). h ow To Order Shell Size - Contact Arrangements Contact Size and Qty Shell Size- B Sample Part Number 280-027 S 1H15 ME B B Contact Arr. 20 22 Standard Density Basic Part Number 280-027S 1S9 9 2S15 15 Shell Size- Contact Arrangements are shown in the adjacent table Contact Arrangement 3S25 25 4S37 37 ME = Electroless Nickel (RoHS) MT = Nickel-PTFE (RoHS) 5S50 50 JF = Cadmium with Yellow Chromate Shell Finish Z2 = Gold (RoHS) High Density Z1 = Passivated Stainless Steel (RoHS) 1H15 15 2H26 26 N = No Hardware (supplied with 8-32 tapped holes) Mating h ardware P = 4-40 Female Jackposts 3H44 44 4H62 62 A = .125 (3.18) Tail Length 5H78 78 PC Tail Length B = .250 (6.35) Tail Length 6H104 104 Materials and Finishes Mating h ardware Shell Aluminum alloy N P Copper alloy, 50 microinches gold No Hardware 4-40 Female Jackposts Contacts plated 4-40 Female Threads in Mounting Holes Insulator Thermoset epoxy Potting Compound Epoxy Hardware 300 series stainless steel Specifications Current Rating 22 5 AMPS, 20 7.5 AMPS Test Voltage 1000 VAC RMS Insulation Resistance 5000 megohms minimum Operating Temperature -65 C. to +200 C. Choose this option for Ingress Protection IP 67 rear panel mounting and order jackpost kit 289-016 Shock 300 g. separately. Vibration, Random 43.92 g. B-22 2013 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324series 28 HiPer-D Standard and High-Density Connectors 280-027S straight PC tail socket connectors with low profile mounting flange 280-027S DIMENSIONS STD DENSITY SIZE 20HD CONTACTS .030.002(0.760.05) TAIL LENGTH .015 HI DENSITY SIZE 22D CONTACTS (0.38) .020.002(0.510.05) .025 C B 4-40 UNC 2B TH D 4-40 UNC 2B TH D .150 (3.81) MIN. DEEP TYP 2PL .150 (3.81) MIN. DEEP TYP 2PL OR 4-40 JACKPOST 2 PL B .435 (11.05) .243.003 C (6.17.0.08) A .049 (1.24) 10 TYP A B C Basic Shell in mm in mm Size .015 0.38 .015 0.38 in. mm 1.213 30.81 .494 12.55 .984 24.99 1 1.541 39.14 .494 12.55 1.312 33.32 2 2.088 53.04 .494 12.55 1.852 47.04 3 2.729 69.32 .494 12.55 2.500 63.50 4 2.635 66.93 .605 15.37 2.406 61.11 5 2.729 69.32 .668 16.97 2.500 63.50 6 NOTES 1. Contacts are factory-installed, non-removable and are potted with epoxy. 2. HiPer-D connectors are available with a wide variety of materials and finishes. See About Series 28 HiPer-D Shell Plating Options for additional choices . Glenair offers the industrys widest selection of plating and material choices with no setup charge, no minimum order quantity and no schedule impact. 3. For panel cutout dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 4. For printed circuit board mounting dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 5. HiPer-D connectors meet the requirements of MIL-DTL-24308 and are intermateable with standard M24308-type D-Subminiature connectors with corresponding contact arrangements and type. 6. Additional electrical, mechanical and environmental specifications are listed in HiPer-D Product Specification. B-23 2013 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324