280-029S1H15MEPA Glenair

SERIES 28 HiPer-D Standard and High-Density Connectors 280-029S right angle PC tail socket connectors with low profile mounting flange Low profile right angle PC tail HiPer-D socket connectors feature rugged machined aluminum shell and stainless steel cover for improved EMI protection. Contacts are non-removable size, 20 or 22. Intermateable with standard M24308-type D-Subminiature connectors, the HiPer-D features epoxy potting for environmental sealing. Threaded holes on the rear of the connector allow attachment to circuit board. Glass-reinforced thermoset epoxy insulators. 1000 VAC, 5 Amps ( 22) or 7.5 Amps ( 20). How To Order B Sample Part Number 280-029S 3S25 JF P A Basic Part Number 280-029S Shell Size- See Shell Size - Contact Arrangements Table Contact Arrangement ME = Electroless Nickel (RoHS) MT = Nickel-PTFE (RoHS) Shell Finish JF = Cadmium with Yellow Chromate Z2 = Gold (RoHS) Z1 = Passivated Stainless Steel (RoHS) N = No Hardware (supplied with 4-40 tapped holes) Mating Hardware P = 4-40 Female Jackposts A = .125 (3.18) Tail Length PC Tail Length B = .250 (6.35) Tail Length Materials and Finishes Shell Size - Contact Arrangements Mating Hardware Shell Aluminum alloy Contact Size and Qty N Shell Size- No Hardware Copper alloy, 50 Contact Arr. 20 22 Contacts 4-40 Female Threads in Mounting Holes microinches gold plated Standard Density Insulator Thermoset epoxy 1S9 9 Potting Epoxy Compound 2S15 15 Hardware 300 series stainless steel 3S25 25 Specifications 4S37 37 Current Rating 22 5 AMPS, 20 7.5 AMPS 5S50 50 Choose this option for rear panel mounting Test Voltage 1000 VAC RMS and order jackpost kit 289-016 separately. High Density Insulation 5000 megohms minimum P Resistance 1H15 15 4-40 Female Jackposts Operating -65 C. to +200 C. Temperature 2H26 26 Ingress 3H44 44 IP 67 Protection Shock 300 g. 4H62 62 Vibration, 5H78 78 43.92 g. Random 6H104 104 B-36 2015 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 28 HiPer-D Catalog Dimensions in Inches (millimeters) are subject to change without notice.SERIES 28 HiPer-D Standard and High-Density Connectors 280-029S right angle PC tail socket connectors with low profile mounting flange 280-029S DIMENSIONS 4-40 UNC 2B TH D .150 (3.81) MIN. DEEP TYP 2PL A OR JACKPOST 2PL SEE PCB FOOTPRINTS B B .020.002 (0.510.05) C FOR HIGH DENSITY 22D .318 10 (8.08) .030.002 (0.760.05) TYP FOR STD DENSITY 20HD PC TAIL LENGTH .015 (3.81) .243.005 (6.170.13) 4-40 UNC 2B TH D .150 (3.81) MIN. DEEP TYP 2PL C A B C Basic Shell in mm in mm Size .015 0.38 .015 0.38 in. mm 1 1.213 30.81 .494 12.55 .984 24.99 2 1.541 39.14 .494 12.55 1.312 33.32 3 2.088 53.04 .494 12.55 1.852 47.04 4 2.729 69.32 .494 12.55 2.500 63.50 5 2.635 66.93 .605 15.37 2.406 61.11 6 2.729 69.32 .668 16.97 2.500 63.50 NOTES 1. Contacts are factory-installed, non-removable and are potted with epoxy. 2. HiPer-D connectors are available with a wide variety of materials and finishes. See About Series 28 HiPer-D Shell Plating Options for additional choices . Glenair offers the industrys widest selection of plating and material choices with no setup charge, no minimum order quantity and no schedule impact. 3. For panel cutout dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 4. For printed circuit board mounting dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 5. HiPer-D connectors meet the requirements of MIL-DTL-24308 and are intermateable with standard M24308-type D-Subminiature connectors with corresponding contact arrangements and type. 6. Additional electrical, mechanical and environmental specifications are listed in HiPer-D Product Specification . 2015 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 28 HiPer-D Catalog B-37 Dimensions in Inches (millimeters) are subject to change without notice.