310 310-034 O-Ring Sealed Shrink Boot Adapter Direct Coupling - Standard Profile CONNECTOR 310 D S 034 M 16 T DESIGNATORS * Product Series Shrink Boot (Table III - A-B -C-D-E-F Omit for None) Connector G-H-J-K-L-S Designator Shell Size * Conn. Desig. B See Note 4 Angle and Profile Finish (Table II) DIRECT H = 45 J = 90 Basic Part No. COUPLING S = Straight O-Ring K (Table A Thread (Table I) TABLE II - STANDARD FINISHES V) GLENAIR SYMBOL FINISH B Cadmium Plate, Olive Drab C Anodize, Black B Cable G Hard Coat, Anodic L (Table V) (Table I) Entry M Electroless Nickel NF Cadmium Plate, Olive Drab Over Electroless Nickel See Back Cover for Complete Finish Information and Additional Finish Options G J J (Table IV) E (Table III) (Table III) (Table IV) F (Table IV) B (Table I) B (Table I) H (Table IV) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 310 - Page 4 310-034 O-Ring Sealed Shrink Boot Adapter Direct Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: FRONT ADAPTER TABLE IV: DIMENSIONS J Max - Conn. Designator Shell E F G H Shell A-E-F Size Max Max Max Max Size J-H-L-S D-B-G-K C 08/09 .639 (16.2) .810 (20.6) .750 (19.1) .920 (23.4) 08/09 1.180 (30.0) 1.250 (31.8) 10/11 .664 (16.9) .840 (21.3) .810 (20.6) .980 (24.9) 10/11 1.180 (30.0) 1.250 (31.8) 12/13 .688 (17.5) .860 (21.8) .870 (22.1) 1.040 (26.4) 12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 14/15 .705 (17.9) .890 (22.6) .920 (23.4) 1.110 (28.2) 14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 16/17 .732 (18.6) .910 (23.1) .980 (24.9) 1.170 (29.7) 16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 18/19 .748 (19.0) .920 (23.4) 1.020 (25.9) 1.190 (30.2) 18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 20/21 .773 (19.6) .940 (23.9) 1.080 (27.4) 1.250 (31.8) 20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 22/23 .800 (20.3) .980 (24.9) 1.140 (29.0) 1.330 (33.8) 22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 24/25 .823 (20.9) 1.010 (25.7) 1.200 (30.5) 1.400 (35.6) 24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 28 1.041 (26.4) 1.180 (30.0) 1.480 (37.6) 1.640 (41.7) 28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 32 1.092 (27.7) 1.370 (34.8) 1.610 (40.9) 1.880 (47.8) 32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE V: CABLE ENTRY AND SHRINK BOOT Shell L Cable Entry Size K Max Max Min Shrink Boot * 08 .688 (17.5) .250 (6.4) .500 (12.7) 770-001S103 10/11 .500 (12.7) .803 (20.4) .355 (9.0) 770-001S103 12/13 .938 (23.8) .491 (12.5) .500 (12.7) 770-001S104 14/15 1.063 (27.0) .565 (14.4) 770-001S104 .500 (12.7) 770-001S106 16/17 .500 (12.7) 1.238 (31.4) .690 (17.5) 18 1.310 (33.3) .769 (19.5) 770-001S106 .500 (12.7) 770-001S107 20 .500 (12.7) 1.436 (36.5) .844 (21.4) 22 1.560 (39.6) 1.019 (25.9) 770-001S107 .500 (12.7) 24 1.686 (42.8) 1.134 (28.8) 770-001S108 .500 (12.7) 770-001S108 28 .687 (17.4) 2.062 (52.4) 1.369 (34.8) 32 2.312 (58.7) 1.615 (41.0) 770-001S109 .687 (17.4) Consult Factory 36 .687 (17.4) 2.562 (65.1) 1.830 (46.5) 40 2.812 (71.4) 2.045 (51.9) Consult Factory .687 (17.4) * Equivalent boot may be suppplied in lieu of stated part number. 1. Cable Entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 2. See Shrink Boot Reference Information (page 40). 3. Metric dimensions (mm) are indicated in parentheses. 4. When using Connector Designator B refer to pages 18 and 19 for part number development. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 310 - Page 5 REV. 13 JUNE 2010 310