319 319-043 EMI/RFI Shield Sock Shrink Boot Adapter with Optional Shrink Boot Standard Profile - Direct Coupling 319 F J 043 M 16 06-6-4 T Product Series Shrink Boot (Table IV - CONNECTOR Omit for None) DESIGNATORS Connector * Designator Length: S only A-B -C-D-E-F (1/2 inch increments: Angle and Profile e.g. 4 = 2 inches) G-H-J-K-L-S J = 90 H = 45 Shield Length (1 inch increments: * Conn. Desig. B See Note 6 S = Straight Minimum 6 inches) DIRECT Basic Part No. Cable Entry (Table IV) COUPLING Finish (Table II) Shell Size (Table I) * Length .060 (1.52) Length .060 (1.52) Length * Min. Order Length 2.0 Inch Minimum Order A Thread (See Note 5) Length 1.5 Inch O-Ring (Table I) (See Note 5) Cable B (Table I) Entry STYLE 2 (STRAIGHT See Note 7) A Thread J E (Table I) J G (Table IV) (Table III) (Table III) (Table IV) F (Table IV) B B (Table I) (Table I) H (Table IV) .140/.130 (3.6/3.3) Typ. Shield Length Cable Entry (Approx.) Single Layer Shield (Tinned Copper) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 319 - Page 8319-043 EMI/RFI Shield Sock Shrink Boot Adapter with Optional Shrink Boot Standard Profile - Direct Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: FRONT ADAPTER TABLE V: CABLE ENTRY J Max - Conn. Designator SHRINK BOOT Shell A-E-F Dash Cable Shrink Size J-H-L-S D-B-G-K C No. Boot Entry 08/09 1.180 (30.0) 1.250 (31.8) 01 .188 (4.8) n/a 10/11 1.180 (30.0) 1.250 (31.8) 02 .250 (6.4) n/a 12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 03 .312 (7.9) 770-001S103 14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 04 .375 (9.5) 770-001S103 16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 05 770-001S103 .438 (11.1) 18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 06 .500 (12.7) 770-001S104 20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 07 .562 (14.3) 770-001S104 22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 08 .625 (15.9) 770-001S104 24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 09 .688 (17.5) 770-001S105 28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 10 770-001S105 .750 (19.1) 32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 11 .812 (20.6) 770-001S105 36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 12 .875 (22.2) 770-001S106 40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) 13 .938 (23.8) 770-001S106 14 1.000 (25.4) 770-001S106 TABLE IV: DIMENSIONS 15 770-001S107 1.250 (31.8) 16 1.500 (38.1) 770-001S108 Dash E F G H 17 1.750 (44.5) n/a No. Max Max Max Max 18 2.000 (50.8) n/a 01 .639 (16.2) .952 (24.2) .750 (19.1) 1.062 (27.0) 19 1.125 (28.6) n/a 02 .664 (16.9) .982 (24.9) .810 (20.6) 1.122 (28.5) 20 n/a 1.375 (34.9) 03 .688 (17.5) 1.002 (25.5) .870 (22.1) 1.182 (30.0) 21 1.625 (41.3) n/a 04 .688 (17.5) 1.002 (25.5) .870 (22.1) 1.182 (30.0) 22 1.062 (27.0) n/a 05 .705 (17.9) 1.032 (26.2) .920 (23.4) 1.252 (31.8) 23 1.188 (30.2) n/a 06 .705 (17.9) 1.032 (26.2) .920 (23.4) 1.252 (31.8) 24 1.875 (47.6) n/a 07 .732 (18.6) 1.052 (26.7) .980 (24.9) 1.312 (33.3) 08 .732 (18.6) 1.052 (26.7) .980 (24.9) 1.312 (33.3) 09 .748 (19.0) 1.062 (27.0) 1.020 (25.9) 1.332 (33.8) 10 .773 (19.6) 1.082 (27.5) 1.080 (27.4) 1.392 (35.4) 11 .773 (19.6) 1.082 (27.5) 1.080 (27.4) 1.392 (35.4) TABLE II: STANDARD FINISHES 12 .800 (20.3) 1.122 (28.5) 1.140 (29.0) 1.472 (37.4) GLENAIR 13 .800 (20.3) 1.122 (28.5) 1.140 (29.0) 1.472 (37.4) SYMBOL FINISH 14 .823 (20.9) 1.152 (29.3) 1.200 (30.5) 1.542 (39.2) B Cadmium Plate, Olive Drab M Electroless Nickel 15 1.041 (26.4) 1.322 (33.6) 1.480 (37.6) 1.782 (45.3) NF Cadmium Plate, Olive Drab Over 16 1.092 (27.7) 1.362 (34.6) 1.610 (40.9) 1.872 (47.5) Electroless Nickel 17 1.138 (28.9) 1.412 (35.9) 1.720 (43.7) 1.982 (50.3) See Back Cover for Complete Finish Information 18 1.184 (30.1) 1.452 (36.9) 1.830 (46.5) 2.092 (53.1) and Additional Finish Options 19 .823 (20.9) 1.152 (29.3) 1.200 (30.5) 1.542 (39.2) 20 1.041 (26.4) 1.322 (33.6) 1.480 (37.6) 1.780 (45.2) 21 1.092 (27.7) 1.362 (34.6) 1.610 (40.9) 1.872 (47.5) 1. Cable Entry or range is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 2. See Shrink Boot Reference Information (page 40). 3. Metric dimensions (mm) are indicated in parentheses. 4. O-Ring not supplied with Connector Designator A. 5. Consult factory for shorter lengths on straight backshells. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. 7. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only.) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 319 - Page 9 319