320FA001M16 Glenair

32 320-001 Extender Backshell Standard Profile - Rotatable Coupling 320 F S 001 M 16-3 CONNECTOR DESIGNATORS Product Series Length - Straight only (1/2 inch increments: A-D-F-H-L-S Connector e.g. 3 = 1.5 inches) Minimum Designator order length 1.0 inches ROTATABLE COUPLING Angle and Profile Shell Size (Table I) L = 90 K = 45 Finish (Table II) S = Straight Basic Part No. Length E .060 (1.52) A Thread Class 2B (Table III) (Table I) F (Table III) C Typ. (Table I) A Thread - Class 2A G (Table I) (Table III) TABLE II : STANDARD FINISHES GLENAIR SYMBOL FINISH Now Available with the NESTOR B Cadmium Plate, Olive Drab C Anodize, Black Add -445 to Specify G Hard Coat, Anodic Glenairs Non-Detent, M Electroless Nickel H (Table III) Spring-Loaded, Self- NF Cadmium Plate, Olive Drab Over Electroless Nickel Locking Coupling. See Back Cover for Complete Finish Information and Additional Finish Options TABLE III: DIMENSIONS See inside back Shell Size cover fold-out or Conn. Desig. G F E H pages 13 and 14 A-F-L-S H Max Max Max Max for unabridged 08 09 .940 (23.9) .890 (22.6) .830 (21.1) 1.000 (25.4) 10 11 1.010 (25.7) .920 (23.4) .860 (21.8) 1.070 (27.2) Tables I and II. 12 13 1.070 (27.2) .942 (23.9) .882 (22.4) 1.130 (28.7) 14 15 1.130 (28.7) .970 (24.6) .900 (22.9) 1.190 (30.2) Metric dimensions 16 17 1.190 (30.2) .990 (25.1) .930 (23.6) 1.250 (31.8) (mm) are indicated in 18 19 1.240 (31.5) 1.010 (25.7) .950 (24.1) 1.300 (33.0) parentheses. 20 21 1.310 (33.3) 1.040 (26.4) .980 (24.9) 1.370 (34.8) 22 23 1.360 (34.5) 1.060 (26.9) 1.000 (25.4) 1.420 (36.1) 24 25 1.540 (39.1) 1.090 (27.7) 1.030 (26.2) 1.490 (37.8) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 32 - Page 2320-002 Extender Backshell Standard Profile - Direct Coupling - Straight Only 320 F S 002 M 16-3 CONNECTOR DESIGNATORS Product Series Length (1/2 inch increments: e.g. 3 = 1.5 inches) Minimum * A-B -C-D-E-F Connector Designator order length 1.5 inches Angle and Profile Shell Size (Table I) G-H-J-K-L-S S = Straight * Conn. Desig. B See Note 2 Finish (Table II) Basic Part No. DIRECT COUPLING Length .060 (1.52) A Thread, Class 2B (Table I) B (Table I) A Thread Class 2A (Table I) TABLE II : STANDARD FINISHES See inside back cover GLENAIR fold-out or pages 13 and SYMBOL FINISH B Cadmium Plate, Olive Drab 14 for unabridged C Anodize, Black Tables I and II. G Hard Coat, Anodic M Electroless Nickel NF Cadmium Plate, Olive Drab Over 1. Metric dimensions (mm) are indicated in parentheses. Electroless Nickel 2. When using Connector Designator B refer to pages 18 See Back Cover for Complete Finish Information and Additional Finish Options and 19 for part number development. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 32 - Page 3 32