32
320-001
Extender Backshell
Standard Profile - Rotatable Coupling
320 F S 001 M 16-3
CONNECTOR
DESIGNATORS
Product Series Length - Straight only
(1/2 inch increments:
A-D-F-H-L-S
Connector e.g. 3 = 1.5 inches) Minimum
Designator order length 1.0 inches
ROTATABLE
COUPLING Angle and Profile Shell Size (Table I)
L = 90
K = 45 Finish (Table II)
S = Straight
Basic Part No.
Length
E
.060 (1.52)
A Thread Class 2B (Table III)
(Table I)
F (Table III)
C Typ.
(Table I)
A Thread - Class 2A
G
(Table I)
(Table III)
TABLE II : STANDARD FINISHES
GLENAIR
SYMBOL FINISH Now Available
with the NESTOR
B Cadmium Plate, Olive Drab
C Anodize, Black
Add -445 to Specify
G Hard Coat, Anodic
Glenairs Non-Detent,
M Electroless Nickel
H (Table III)
Spring-Loaded, Self-
NF Cadmium Plate, Olive Drab Over
Electroless Nickel Locking Coupling.
See Back Cover for Complete Finish Information
and Additional Finish Options
TABLE III: DIMENSIONS
See inside back
Shell Size
cover fold-out or
Conn. Desig.
G F E H
pages 13 and 14
A-F-L-S H Max Max Max Max
for unabridged
08 09 .940 (23.9) .890 (22.6) .830 (21.1) 1.000 (25.4)
10 11 1.010 (25.7) .920 (23.4) .860 (21.8) 1.070 (27.2)
Tables I and II.
12 13 1.070 (27.2) .942 (23.9) .882 (22.4) 1.130 (28.7)
14 15 1.130 (28.7) .970 (24.6) .900 (22.9) 1.190 (30.2)
Metric dimensions
16 17 1.190 (30.2) .990 (25.1) .930 (23.6) 1.250 (31.8)
(mm) are indicated in
18 19 1.240 (31.5) 1.010 (25.7) .950 (24.1) 1.300 (33.0)
parentheses.
20 21 1.310 (33.3) 1.040 (26.4) .980 (24.9) 1.370 (34.8)
22 23 1.360 (34.5) 1.060 (26.9) 1.000 (25.4) 1.420 (36.1)
24 25 1.540 (39.1) 1.090 (27.7) 1.030 (26.2) 1.490 (37.8)
2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com E-Mail: sales@glenair.com
Series 32 - Page 2320-002
Extender Backshell
Standard Profile - Direct Coupling - Straight Only
320 F S 002 M 16-3
CONNECTOR
DESIGNATORS
Product Series Length (1/2 inch increments:
e.g. 3 = 1.5 inches) Minimum
*
A-B -C-D-E-F
Connector Designator order length 1.5 inches
Angle and Profile Shell Size (Table I)
G-H-J-K-L-S
S = Straight
* Conn. Desig. B See Note 2 Finish (Table II)
Basic Part No.
DIRECT
COUPLING
Length
.060 (1.52)
A Thread, Class 2B
(Table I)
B
(Table I)
A Thread
Class 2A
(Table I)
TABLE II : STANDARD FINISHES
See inside back cover
GLENAIR
fold-out or pages 13 and
SYMBOL
FINISH
B Cadmium Plate, Olive Drab
14 for unabridged
C Anodize, Black
Tables I and II.
G Hard Coat, Anodic
M Electroless Nickel
NF Cadmium Plate, Olive Drab Over
1. Metric dimensions (mm) are indicated in parentheses.
Electroless Nickel
2. When using Connector Designator B refer to pages 18
See Back Cover for Complete Finish Information
and Additional Finish Options
and 19 for part number development.
2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com E-Mail: sales@glenair.com
Series 32 - Page 3
32