340AS002C22-4N Glenair

340-002 O-Ring Sealed Shorting Cap Backshell Direct Coupling 340 F S 002 M 16-5 H 6 A CONNECTOR Product Series End Fitting Symbol (Table IV) DESIGNATORS * Connector Attachment Length A-B -C-D-E-F Designator (1/2 inch increments: e.g. 6 = 3 inches) Angle and Profile G-H-J-K-L-S S = Straight Attachment Symbol (Table III) * Conn. Desig. B See Note 3 Basic Part No. Length (1/2 inch increments: DIRECT e.g. 5 = 2.5 inches, 1.0 Inch COUPLING Finish (Table II) Minimum Order Length ) Shell Size (Table I) Length .060 (1.52) See inside back cover A Thread O-Ring (Table I) fold-out or pages 13 and 14 for unabrdiged Tables I and II. B (Table I) TABLE IV: END FITTING Symbol E Dia. A .140 (3.6) B .167 (4.2) C .182 (4.6) .50 (12.7) D .191 (4.9) Max E .125 (3.2) F .218 (5.5) Attachment E Dia (Table IV) Length .25 (6.4) TABLE III: ATTACHMENT OPTIONS Symbol Attachment TABLE II: STANDARD FINISHES C No attachment, body strap only GLENAIR D Bead chain, cres, passivate, with terminal SYMBOL FINISH B Cadmium Plate, Olive Drab E Link chain, cres, passivate, with reverse link C Anodize, Black F Wire rope, nylon jacket, with terminal G Hard Coat, Anodic G Nylon rope, with terminal M Electroless Nickel H Wire rope, teflon jacket, with terminal NF Cadmium Plate, Olive Drab Over Electroless Nickel N Attachment omitted See Back Cover for Complete Finish Information R Wire rope, PVC jacket, with terminal and Additional Finish Options S 8 Sash chain, cres, passivate U Wire rope, polyurethane jacket, with terminal 1. Metric dimensions (mm) are indicated in parentheses. 2. Custom engraving available, consult factory. 3. When using Connector Designator B refer to pages 18 and 19 for part number development. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 34 - Page 3 34