360FS017M10083 Glenair

36 360-017 Non-Environmental Backshell with QwikClamp Strain Relief Standard Profile - Self-Locking - Rotatable Coupling 360 F S 017 M 16 10 6 CONNECTOR DESIGNATORS Product Series Length: S only (1/2 inch increments: A-F-H-L-S Connector Designator e.g. 6 = 3 inches) SELF-LOCKING Angle and Profile Cable Entry (Tables IV) H = 45 ROTATABLE J = 90 Shell Size (Table I) COUPLING S = Straight QWIKCLAMP Finish (Table II) Basic Part No. STRAIN RELIEF Length .060 (1.52) Min. Order A Thread Length 1.5 Inch (Table I) (See Note 1) Cable E Typ. L (Table IV) (Table I) Range Anti-Rotation Device (Typ.) Internal Mechanical Strain-Relief K Anti-Rotation (Typ.) (Table IV) F H (Table III) (Table III) G (Table III) J (Table III) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 36 - Page 8360-017 Non-Environmental Backshell with QwikClamp Strain Relief Standard Profile - Self-Locking - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size G J Conn. Desig. F H H A-F-L-S Max Max Max Max 08 09 .795 (20.2) 1.390 (35.3) .906 (23.0) 1.500 (38.1) 10 11 1.420 (36.1) .820 (20.8) .966 (24.5) 1.560 (39.6) 12 13 .844 (21.4) 1.440 (36.6) 1.026 (26.1) 1.620 (41.1) 14 15 1.470 (37.3) .861 (21.9) 1.076 (27.3) 1.690 (42.9) 17 16 .888 (22.6) 1.490 (37.8) 1.136 (28.9) 1.750 (44.5) 18 19 .904 (23.0) 1.500 (38.1) 1.176 (29.9) 1.770 (45.0) 20 21 1.520 (38.6) .929 (23.6) 1.236 (31.4) 1.830 (46.5) 22 23 .956 (24.3) 1.560 (39.6) 1.296 (32.9) 1.910 (48.5) 24 25 1.590 (40.4) .979 (24.9) 1.356 (34.4) 1.980 (50.3) 28 1.197 (30.4) 1.760 (44.7) 1.636 (41.6) 2.220 (56.4) 32 1.280 (32.5) 1.800 (45.7) 1.780 (45.2) 2.310 (58.7) 36 1.850 (47.0) 1.294 (32.9) 1.876 (47.7) 2.420 (61.5) 40 1.340 (34.0) 1.890 (48.0) 1.986 (50.4) 2.530 (64.3) 44 1.940 (49.3) 1.360 (34.5) 2.235 (56.8) 2.650 (67.3) TABLE IV: CABLE ENTRY Cable Range Dash K L No. Max Max Min Max .530 (13.5) .720 (18.3) .128 (3.3) .250 (6.4) 08 12 .710 (18.0) .910 (23.1) .233 (5.9) .375 (9.5) 16 .720 (18.3) 1.090 (27.7) .358 (9.1) .500 (12.7) 20 .720 (18.3) 1.220 (31.0) .482 (12.2) .625 (15.9) 24 .660 (16.8) 1.340 (34.0) .545 (13.8) .750 (19.1) .790 (20.1) 1.530 (38.9) .670 (17.0) .875 (22.2) 28 32 .870 (22.1) 1.720 (43.7) .795 (20.2) 1.000 (25.4) 36 .830 (21.1) 1.850 (47.0) .889 (22.6) 1.125 (28.6) 40 .820 (20.8) 1.970 (50.0) 1.014 (25.8) 1.250 (31.8) 44 .910 (23.1) 2.090 (53.1) 1.155 (29.3) 1.375 (34.9) .900 (22.9) 2.280 (57.9) 1.280 (32.5) 1.500 (38.1) 48 TABLE II: STANDARD FINISHES GLENAIR 1. Consult factory for shorter lengths on straight backshells. SYMBOL FINISH B Cadmium Plate, Olive Drab 2. Metric dimensions (mm) are indicated in parentheses. C Anodize, Black 3. Cable range is defined as the accommodations range for G Hard Coat, Anodic the wire bundle or cable. M Electroless Nickel Dimensions shown are not intended for inspection NF Cadmium Plate, Olive Drab criteria. Over Electroless Nickel See Inside Back Cover for Additional Finish Options 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 36 - Page 9 36