360HS001NF2108A3 Glenair

36 360-001 Non-Environmental Backshell with Strain Relief Low Profile - Rotatable Coupling 360 F S 001 M 16 10 M 6 Product Series Length: S only CONNECTOR (1/2 inch increments: Connector e.g. 6 = 3 inches) DESIGNATORS Designator Strain Relief Style A-F-H-L-S Angle and Profile (H, A, M, F) A = 90 ROTATABLE B = 45 Cable Entry (Tables X, XI, XII) COUPLING S = Straight Shell Size (Table I) Basic Part No. Finish (Table II) A Thread Length .060 (1.52) Length .060 (1.52) (Table I) Min. Order Length 1.5 Inch Min. Order Length 2.0 Inch (See Note 4) (See Note 4) C Typ. (Table I) G E STYLE 2 (Table III) (Table III) (STRAIGHT See Note 1) .88 (22.4) F (Table III) Max H (Table III) STYLE 2 (45 - 90 See Note 1) STYLE H STYLE A STYLE M STYLE F Heavy Duty Medium Duty Medium Duty Light Duty (Table X) (Table XI) (Table XI) (Table XII) W T X .416 (10.5) Max Cable Cable Cable Cable Y V Y Z Range Range Range Range 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 36 - Page 2 Rev. 07.27.20360-001 Non-Environmental Backshell with Strain Relief Low Profile - Rotatable Coupling TABLE II: STANDARD FINISHES TABLE III: DIMENSIONS GLENAIR Shell Size SYMBOL FINISH E F G H Conn. Desig. B Cadmium Plate, Olive Drab A-F-L-S H Max Max Max Max C Anodize, Black 08 09 .457 (11.6) 1.622 (41.2) .500 (12.7) 1.632 (41.5) G Hard Coat, Anodic M Electroless Nickel 10 11 .520 (13.2) 1.682 (42.7) .595 (15.1) 1.752 (44.5) NF Cadmium Plate, Olive Drab 12 13 .582 (14.8) 1.742 (44.2) .610 (15.5) 1.772 (45.0) Over Electroless Nickel 14 15 .645 (16.4) 2.062 (52.4) .700 (17.8) 2.072 (52.6) See Inside Back Cover 16 17 .738 (18.7) 2.172 (55.2) .885 (22.5) 2.162 (54.9) for Additional Finish Options 18 19 .926 (23.5) 2.362 (60.0) .975 (24.8) 2.332 (59.2) 20 21 .926 (23.5) 2.362 (60.0) .975 (24.8) 2.332 (59.2) See inside back cover 22 23 1.020 (25.9) 2.512 (63.8) 1.125 (28.6) 2.442 (62.0) fold-out or pages 13 24 25 1.020 (25.9) 2.512 (63.8) 1.125 (28.6) 2.442 (62.0) 28 1.145 (29.1) 2.562 (65.1) 1.225 (31.1) 2.612 (66.3) and 14 for unabridged 32 1.207 (30.7) 2.662 (67.6) 1.575 (40.0) 2.862 (72.7) Tables I and II. 36 1.238 (31.4) 2.752 (69.9) 1.775 (45.1) 2.862 (72.7) TABLE X: CABLE ENTRY TABLE XII: CABLE ENTRY Dash T V Cable Range Dash Z Cable Range No. Max Max Min Max No. Max Min Max 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) 02 .968 (24.6) .125 (3.2) .250 (6.4) 06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) 03 1.046 (26.6) .250 (6.4) .375 (9.5) 08 .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) 04 1.156 (29.4) .312 (7.9) .500 (12.7) 10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 05 1.218 (30.9) .437 (11.1) .625 (15.9) 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) 06 1.343 (34.1) .562 (14.3) .750 (19.1) 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 07 1.468 (37.3) .687 (17.4) .875 (22.2) 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 08 1.593 (40.5) .812 (20.6) 1.000 (25.4) 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 10 1.843 (46.8) 1.062 (27.0) 1.250 (31.8) 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 1. When maximum cable entry TABLE XI: CABLE ENTRY (page 21) is exceeded, Style Dash W X Y Cable Range 2 will be supplied. Dimen- No. Min Max Max Max Max sions E, F, G and H will not 03* .437 (11.1) .760 (19.3) .843 (21.4) .156 (4.0) .250 (6.4) apply. Please consult 04* .437 (11.1) .760 (19.3) .906 (23.0) .188 (4.8) .312 (7.9) factory. 06* .281 (7.1) .438 (11.1) .500 (12.7) .760 (19.3) 1.093 (27.8) 2. Metric dimensions (mm) are 08 .563 (14.3) .760 (19.3) 1.187 (30.1) .344 (8.7) .562 (14.3) indicated in parentheses. 10 .375 (9.5) .625 (15.9) .563 (14.3) .760 (19.3) 1.281 (32.5) 3. Cable range is defined as the 12 .563 (14.3) .760 (19.3) 1.500 (38.1) .438 (11.1) .750 (19.1) accommodations range for 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) .562 (14.3) .938 (23.8) the wire bundle or cable. 20 .750 (19.1) 1.250 (31.8) .656 (16.7) 1.323 (33.6) 2.062 (52.4) Dimensions shown are not 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) .781 (19.8) 1.375 (34.9) intended for inspection 28 .969 (24.6) 1.625 (41.3) 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) criteria. 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 1.125 (28.6) 1.875 (47.6) 4. Consult factory for shorter 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 1.469 (37.3) 2.375 (60.3) lengths on straight back- * Not available in Style M clamp. shells. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 36 - Page 3 36