370HA003M2510C Glenair

37 370-003 Water-Tight Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling 370 F S 003 M 16 10 C 6 Product Series Length: S only CONNECTOR (1/2 inch increments: DESIGNATORS Connector e.g. 6 = 3 inches) Designator Strain Relief Style A-F-H-L-S Angle and Profile (B, C, E) ROTATABLE A = 90 B = 45 Cable Entry (Tables IV, V) COUPLING S = Straight Shell Size (Table I) Basic Part No. Finish (Table II) Length .060 (1.52) A Thread Min. Order Length 2.0 Inch Length .060 (1.52) (Table I) (See Note 6) O-Ring Min. Order Length 1.5 Inch (See Note 6) C Typ. (Table I) STYLE 2 E G (STRAIGHT (Table III) (Table III) See Note 1) .88 (22.4) F (Table III) Max H (Table III) STYLE 2 (45 & 90 See Note 1) STYLE B STYLE C STYLE E (Table IV) Medium Duty Medium Duty (Table IV) (Table V) Clamping P J N (See L Bars Note 4) Cable Cable Cable K K M Range Range Range 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 37 - Page 14370-003 Water-Tight Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE iV: CABLE ENTRY Dash J K N Cable Range P No. Max Max Max Ref Min Max 1.031 (26.2) 03 1.219 (31.0) .812 (20.6) .135 (3.4) .156 (4.0) .219 (5.6) 04 1.219 (31.0) .203 (5.2) 1.031 (26.2) .937 (23.8) .188 (4.8) .312 (7.9) 1.219 (31.0) 1.031 (26.2) 06 1.062 (27.0) .285 (7.2) .281 (7.1) .438 (11.1) 08 1.219 (31.0) 1.188 (30.2) .350 (8.9) .312 (7.9) .531 (13.5) 1.031 (26.2) 10 1.281 (32.5) 1.094 (27.8) 1.312 (33.3) .390 (9.9) .375 (9.5) .625 (15.9) 12 1.281 (32.5) 1.562 (39.7) .460 (11.7) .500 (12.7) .750 (19.1) 1.219 (31.0) 16 1.406 (35.7) 1.219 (31.0) 1.750 (44.5) .510 (13.0) .625 (15.9) .938 (23.8) 1.656 (42.1) 1.344 (34.1) 20 2.250 (57.2) .695 (17.7) .938 (23.8) 1.250 (31.8) 24 1.906 (48.4) 2.375 (60.3) .715 (18.2) 1.000 (25.4) 1.375 (34.9) 1.547 (39.3) 28 1.906 (48.4) 1.547 (39.3) 2.625 (66.7) .915 (23.2) 1.250 (31.8) 1.625 (41.3) 32 2.000 (50.8) 2.812 (71.4) 1.070 (27.2) 1.500 (38.1) 1.875 (47.6) 1.734 (44.0) TABLE III: ELBOW DIMENSIONS Shell Size E F G H TABLE II: STANDARD FINISHES Conn. Desig. GLENAIR H A-F-L-S Max Max Max Max SYMBOL FINISH 08 09 .457 (11.6) 1.810 (46.0) .500 (12.7) 1.820 (46.2) B Cadmium Plate, Olive Drab 10 11 .520 (13.2) 1.869 (47.5) .595 (15.1) 1.940 (49.3) C Anodize, Black 12 13 .582 (14.8) 1.929 (49.0) .610 (15.5) 1.960 (49.8) G Hard Coat, Anodic M Electroless Nickel 14 15 .645 (16.4) 2.359 (59.9) .700 (17.8) 2.369 (60.2) NF Cadmium Plate, Olive Drab 17 16 .738 (18.7) 2.469 (62.7) .885 (22.5) 2.459 (62.5) Over Electroless Nickel 18 19 .926 (23.5) 2.659 (67.5) .975 (24.8) 2.629 (66.8) See Inside Back Cover 20 21 .926 (23.5) 2.659 (67.5) .975 (24.8) 2.629 (66.8) for Additional Finish Options 22 23 1.020 (25.9) 2.872 (72.9) 1.125 (28.6) 2.802 (71.2) 24 25 1.020 (25.9) 2.872 (72.9) 1.125 (28.6) 2.802 (71.2) 1. When maximum cable entry 28 1.145 (29.1) 2.905 (73.8) 1.225 (31.1) 2.955 (75.1) (page 21) is exceeded, Style 2 32 1.207 (30.7) 3.005 (76.3) 1.575 (40.0) 3.205 (81.4) will be supplied. Dimensions E, 36 1.238 (31.4) 3.315 (84.2) 1.775 (45.1) 3.255 (82.7) F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are TABLE V: CABLE ENTRY indicated in parentheses. L M Cable Range Dash 3. Cable range is defined as the No. Max Max Min Max accommodations range for 03 .739 (18.8) .812 (20.6) .156 (4.0) .219 (5.6) the wire bundle or cable. 04 .739 (18.8) .937 (23.8) .188 (4.8) .312 (7.9) Dimensions shown are not 06 .739 (18.8) 1.062 (27.0) .281 (7.1) .438 (11.1) intended for inspection criteria739 (18.8) 1.188 (30.2) .312 (7.9) .531 (13.5) 08 4. Saddles are bottomed on Clamp 10 .791 (20.1) 1.312 (33.3) .375 (9.5) .625 (15.9) Ears. 12 .880 (22.4) 1.562 (39.7) .500 (12.7) .750 (19.1) 5. Interface O-Ring not supplied with 16 .901 (22.9) 1.750 (44.5) .625 (15.9) .938 (23.8) Connector Designator A. 20 1.031 (26.2) 2.250 (57.2) .938 (23.8) 1.250 (31.8) 6. Consult factory for shorter 1.250 (31.8) 2.375 (60.3) 1.000 (25.4) 1.375 (34.9) 24 lengths on straight backshells. 28 1.250 (31.8) 2.625 (66.7) 1.250 (31.8) 1.625 (41.3) 32 1.312 (33.3) 2.812 (71.4) 1.500 (38.1) 1.875 (47.6) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 37 - Page 15 37