370HA005M1304L Glenair

37 370-005 Splash-Proof Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling 370 F S 005 M 16 10 L 6 Product Series Length: S only (1/2 inch incre- CONNECTOR ments: e.g. 6 = 3 inches) DESIGNATORS Connector Designator Strain Relief Style (L,G) A-F-H-L-S Angle and Profile A = 90 Cable Entry (Tables IV, V) ROTATABLE B = 45 COUPLING S = Straight Shell Size (Table III) Finish (Table II) Basic Part No. Length .060 (1.52) Min. Order Length 2.0 Inch A Thread .312 (7.9) Length * (See Note 6) (Table I) O-Rings Max * Length .060 (1.52) C Typ. Min. Order (Table I) Length 1.5 Inch (See Note 6) STYLE 2 (STRAIGHT E G See Note 1) (Table III) (Table III) .88 (22.4) Max F (Table III) H (Table III) STYLE 2 (45 & 90 See Note 1) STYLE L STYLE G Light Duty (Table IV) Light Duty (Table V) .850 .072 (1.8) (21.6) Max Max Cable Cable J K Range Range 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 37 - Page 20370-005 Splash-Proof Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E F G H Conn. Desig. A-F-L-S H Max Max Max Max 09 08 .457 (11.6) 2.030 (51.6) .500 (12.7) 2.040 (51.8) 10 11 .520 (13.2) 2.030 (51.6) .595 (15.1) 2.040 (51.8) 12 13 .582 (14.8) 2.090 (53.1) .610 (15.5) 2.160 (54.9) 14 15 .645 (16.4) 2.150 (54.6) .700 (17.8) 2.180 (55.4) 16 17 .738 (18.7) 2.240 (56.9) .885 (22.5) 2.250 (57.2) 19 18 .926 (23.5) 2.340 (59.4) .975 (24.8) 2.340 (59.4) 20 21 .926 (23.5) 2.340 (59.4) .975 (24.8) 2.340 (59.4) 22 23 1.020 (25.9) 2.540 (64.5) 1.125 (28.6) 2.510 (63.8) 24 25 1.020 (25.9) 2.540 (64.5) 1.125 (28.6) 2.510 (63.8) 28 1.145 (29.1) 2.680 (68.1) 1.225 (31.1) 2.620 (66.5) 32 1.207 (30.7) 2.680 (68.1) 1.575 (40.0) 2.620 (66.5) 36 1.238 (31.4) 2.680 (68.1) 1.775 (45.1) 2.620 (66.5) TABLE IV: CABLE ENTRY TABLE V: CABLE ENTRY Dash Dash J Cable Range K Cable Range No. Max Min Max No. Max Min Max 01 .781 (19.8) .062 (1.6) .125 (3.2) 01 .593 (15.1) .062 (1.6) .125 (3.2) 02 .968 (24.6) .125 (3.2) .250 (6.4) 02 .718 (18.2) .125 (3.2) .250 (6.4) 03 1.046 (26.6) .250 (6.4) .375 (9.5) 03 .873 (22.2) .250 (6.4) .375 (9.5) 04 04 1.156 (29.4) .250 (6.4) .500 (12.7) .968 (24.6) .375 (9.5) .500 (12.7) 05 1.218 (30.9) .375 (9.5) .625 (15.9) 05 1.109 (28.2) .500 (12.7) .625 (15.9) 06 1.343 (34.1) .500 (12.7) .750 (19.1) 06 1.218 (30.9) .625 (15.9) .750 (19.1) 07 1.468 (37.3) .625 (15.9) .875 (22.2) 07 1.343 (34.1) .750 (19.1) .875 (22.2) 08 1.593 (40.5) .625 (15.9) 1.000 (25.4) 08 1.468 (37.3) .875 (22.2) 1.000 (25.4) 09 09 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.593 (40.5) 1.000 (25.4) 1.125 (28.6) 10 1.843 (46.8) .875 (22.2) 1.250 (31.8) 10 1.718 (43.6) 1.125 (28.6) 1.250 (31.8) TABLE II: STANDARD FINISHES 1. When maximum cable entry (page 21) is exceeded, Style 2 will GLENAIR be supplied. SYMBOL FINISH Dimensions E, F, G and H will not apply. Please consult B Cadmium Plate, Olive Drab C Anodize, Black factory. G Hard Coat, Anodic 2. Metric dimensions (mm) are indicated in parentheses. M Electroless Nickel 3. Cable range is defined as the accommodations range for the NF Cadmium Plate, Olive Drab Over Electroless Nickel wire bundle or cable. See Inside Back Cover Dimensions shown are not intended for inspection criteria. for Additional Finish Options 4. Interface O-Ring not supplied with connector designator A. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 37 - Page 21 37